Actions

Toolpack v2.3:Create an MTP2 Link

The MTP2 link is used to link the MTP2 physical layer with a line service carrying SS7 signaling.

In order to create a new MTP2 link, you must configure a number of parameters.


A number of advanced parameters may also be configured as indicated in the latter portion of Step 2 (see below).


To create a new MTP2 link

1. Click 'Create New MTP2 Link', to access the MTP2 link configuration window.


Web Portal v2.3 Create New MTP2 Link.png


2. Enter a name for the MTP2 link.

  • Select the connection mode. Normal requires that you choose the timeslot used. HSL uses all timeslots.
  • Select the line service carrying the SS7 payload, set the protocol type, DPC, and the timeslot rate.


Screenshot-configure-new-MTP2-link.jpg


In this example, when an HSL connection mode is chosen, all of the timeslots are used automatically.

NOTE: At this time, you may also choose to configure vales for the various timers as well as a number of advanced parameters.


Screenshot-new-MTP2-link-HSL-mode.jpg


INSERT IMAGES AND TEXT FOR CONFIGURING ADVANCED OPTIONS


3. Click 'Create' to save the settings.


Screenshot-mtp2-link-save-settings.jpg


4. Verify that the MTP2 link is listed in the MTP2 Links listing.


Screenshot-list-of-active-MTP2-links.jpg