Actions

Toolpack:set date time A: Difference between revisions

mNo edit summary
Line 8: Line 8:
<br/><br/>
<br/><br/>


2-Select the '''Timezone''' where the system is installed.
2-Select the '''Timezone''' from where the system is installed.<br>
3-Select '''NTP''' in '''Time Setting'''. You can also set the date manually. If you do so, select '''MANUAL''' and enter the date and time.<br>
4- Click '''Save'''.<br>
5-Change the '''NTP servers''' if needed. The default value is Centos NTP servers. Internet access is required to sync with external NTP servers.<br>


[[Image:Date_Time_main.png]]
[[Image:Date_Time_main.png]]
<br/><br/>
<br/><br/>


3-Select '''NTP''' in '''Time Setting'''. The other option is to set the date manually. If so then select '''MANUAL''' and you will need to enter the date and time.<br>
==List of Parameters==
4- Click '''Save'''.<br>
 
5-Change the '''NTP servers''' if needed. Default are Centos NTP servers. Internet access is required to sync with external NTP servers.<br>
* [[Parameter: Timezone|Timezone]]
* [[Parameter: Time Setting|Time Setting]]
 
'''Advanced Parameters'''
* [[Parameter: IP Header Type of Service (ToS)|IP Header Type of Service (ToS)]]

Revision as of 11:10, 10 October 2017

Applies to version(s): v2.9, v2.10, v3.0

1-Click Services in the navigation panel.

Snmp cfg A 0.png

2-Select the Timezone from where the system is installed.
3-Select NTP in Time Setting. You can also set the date manually. If you do so, select MANUAL and enter the date and time.
4- Click Save.
5-Change the NTP servers if needed. The default value is Centos NTP servers. Internet access is required to sync with external NTP servers.

Date Time main.png

List of Parameters

Advanced Parameters