Actions

M3UA SGP Status

Revision as of 04:36, 4 January 2021 by William Wong (talk | contribs) (→‎Status menu)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Applies to version(s): v2.8.


This article illustrates how to view M3UA SGP status. This can be done from either the Status menu or the Navigation panel.

Status menu

1- Click Status in the navigation panel.

Status 0.png


2- Click the SIGTRAN M3ua tab.

TabM3UA 0.png

  • Note that SCTP is used as the Transport Layer for this protocol, if any firewall is sitting between Telcobridges device and Sigtran network, this firewall needs to be set to allow SCTP traffic to pass through, and enabling the basic connectivity for sigtran link to be up


The status of the M3UA protocol stack is displayed.

StatusM3UA SGP 0.png

Navigation Panel

1- Click M3UA from the navigation panel.

StatusM3UA 1.png

2- Click the Status tab.

StatusM3UA 2.png

3- To configure a periodic refresh of the M3UA status, select a value from Refresh Every.

  • To view the M3UA SAPS, click the Saps tab.

StatusM3UA 3.png

4- To view the status of an M3UA SAP, select an M3UA SAP.

StatusM3UA 4.png

The M3UA SAP status is displayed.

StatusM3UA 5.png

5- To view the status of an M3UA Network, select an M3UA Network.

StatusM3UA 6.png


6- Select a userpart to view its detailed status.

StatusM3UA 7.png

Detailed status is displayed.

StatusM3UA 8.png

7- Select a PSP to view its detailed status.

StatusM3UA 9.png

Detailed PSP status is displayed.

StatusM3UA A.png

8- Select a PRSV to view its detailed status.

StatusM3UA B.png

Detailed PSRV status is displayed. (In this example local)

StatusM3UA C.png

Detailed PSRV status is displayed. (In this example remote)

StatusM3UA D.png

9- Select a Route to view its detailed status.

StatusM3UA E.png

Detailed Route status is displayed. (In this example local)

StatusM3UA F.png

Detailed Route status is displayed. (In this example remote)

StatusM3UA G.png