Toolpack:Protocol Stack Settings A: Difference between revisions

Latest revision as of 12:59, 22 December 2021

(Step 1) Allocate Physical Interfaces	(Step 2) Configure ISDN-PRI Signaling	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create Line interfaces Create Line Services	Configure an ISDN stack OR Configure NFAS	Modify profile	Allocate an ISDN NAP

ISDN Advanced Features

ISDN Overlap Sending
ISDN NFAS Overlap Parameters

[edit]

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring a CAS stack	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create Line Interfaces Create Line services	Copy variant script Create CAS stack Edit the CAS R1 or CAS R2 script to adapt the variant Select CAS R1 tone type Set CAS R2 backward digits string	Modify profile	Create a CAS NAP

[edit]

(Step 1) Configure IP port range	(Step 2) Configure SIP Signaling	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create an IP port range	Create a SIP stack Create a SIP transport server	Modify profile	Allocate a SIP NAP

IP Advanced Features

SIP-I SIP-T
Enable SIP-I SIP-T

SIP Spiral
Enable SIP Spiral

Remote NAT Traversal	Local NAT Traversal
Enable Remote NAT Traversal	Enable Local NAT Traversal

DNS
Enable DNS

[edit]

MTP2-MTP3-ISUP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the MTP2 Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the ISUP Layer	(Step 5) Modify NAP profile	(Step 6) Configure Network Access Points (NAPs)
Create a new line interface Create a new line service	Create an MTP2 Configuration Create an MTP2 Link	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an ISUP Stack Create an ISUP Network Create an ISUP User Part Create an ISUP Interface Create ISUP CIC Groups	Modify profile	Create an ISUP NAP

M2PA-MTP3-ISUP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the M2PA Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the ISUP Layer	(Step 5) Modify NAP profile	(Step 6) Configure Network Access Points (NAPs)
Create a line interface Create a line service	Create the SCTP Configuration Create an M2PA Configuration Create an M2PA SAP Add M2PA Links	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an ISUP Stack Create an ISUP Network Create an ISUP User Part Create an ISUP Interface Create ISUP CIC Groups	Modify profile	Create an ISUP NAP

M3UA-ISUP

(Step 1) Allocate Physical Interfaces	(Step 2a) Configuring the M3UA Layer - IPSP	(Step 2b) Configuring the M3UA Layer - ASP	(Step 2c) Configuring the M3UA Layer - SGP	(Step 3) Configuring the ISUP Layer	(Step 4) Modify NAP profile	(Step 5) Configure Network Access Points (NAPs)
Create new line interface Create new line service	Create the SCTP Configuration Create SS7 Point Codes Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route	Create the SCTP Configuration Create SS7 Point Codes Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route	Create the SCTP Configuration Create SS7 Point Codes Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route	Create an ISUP Stack Create an ISUP Network Create an ISUP User Part Create an ISUP Interface Create ISUP CIC Groups	Modify profile	Create an ISUP NAP

SS7 Advanced Features

Configuring SPIROU
Modifying Profile Modifying Gateway Configurations Modifying ISUP Stack Modifying ISUP Userpart Optional modifications

[edit]

MTP2-MTP3-SCCP-TCAP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the MTP2 Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the SCCP Layer	(Step 5) Configuring the TCAP Layer (optional)
Create new line interface Create new line service	Create an MTP2 Configuration Create an MTP2 Link	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an SCCP Stack Create an SCCP Network Create an SCCP Userpart Create an SCCP LSAP Create an SCCP Route Create an SCCP SSN Create an SCCP GTT Association Create an SCCP GTT Address Map	Create a TCAP Stack Create a TCAP Userpart Activating the Configuration

M2PA-MTP3-SCCP-TCAP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the M2PA Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the SCCP Layer	(Step 5) Configuring the TCAP Layer (optional)
Create a line interface Create a line service	Create the SCTP Configuration Create an M2PA Configuration Create an M2PA SAP Add M2PA Links	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an SCCP Stack Create an SCCP Network Create an SCCP Userpart Create an SCCP LSAP Create an SCCP Route Create an SCCP SSN Create an SCCP GTT Association Create an SCCP GTT Address Map	Create a TCAP Stack Create a TCAP Userpart Activating the Configuration

M3UA-SCCP-TCAP

(Step 1) Configuring the M3UA Layer	(Step 2) Configuring the SCCP Layer	(Step 3) Configuring the TCAP Layer (optional)
Create the SCTP Configuration Create SS7 Point Codes Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route	Create an SCCP Stack Create an SCCP Network Create an SCCP Userpart Create an SCCP LSAP Create an SCCP Route Create an SCCP SSN Create an SCCP GTT Association Create an SCCP GTT Address Map	Create a TCAP Stack Create a TCAP Userpart Activating the Configuration

[edit]

If the Tmedia is used to forward signalling messages to the SSW, you will require to configure M2UA, M3UA or IUA before configuring H.248.

If the Tmedia is used to connect media only, then you can go straight to H.248 Configuration

Signaling

M2UA

(Step 1) Create Line Interfaces	(Step 2) Create MTP2 links	(Step 3) Create M2UA configuration
Create a line interface Create a line service	Create an MTP2 Configuration Create MTP2 Links	Create the SCTP Configuration Create an M2UA Configuration Create an M2UA SAP Create an M2UA Cluster Create M2UA Links Create M2UA Peers

M3UA

(Step 1) Create Line Interfaces	(Step 2) Create MTP2 links	(Step 3) Create MTP3 configuration	(Step 4) Create M3UA configuration
Create a line interface Create a line service	Create an MTP2 Configuration Create MTP2 Links	Create SS7 Point Codes Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Edit the SCTP Configuration Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route

IUA

(Step 1) Create Line Interfaces	(Step 2) Create IUA Configuration
Create a line interface Create a line service	Create the SCTP Configuration Create an IUA Configuration Create an IUA SAP Create an IUA Cluster Create IUA Links Create IUA Peers

Media

TDM NAP (for ISUP/ISDN)

(Step 1) Allocate TDM Physical Interfaces	(Step 2) Modify NAP profile	(Step 3) Configure Network Access Points (NAPs)
Create a line interface Create a line service	Modify profile	Allocate a TDM NAP

VOIP NAP (for SIP)

(Step 1) Create IP Port Ranges	(Step 2) Modify NAP profile	(Step 3) Configure Network Access Points (NAPs)
Create IP port ranges	Modify profile	Allocate a VoIP NAP

CAS NAP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring a CAS stack	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create a line interfaces Create a line service	Copy variant script Create CAS stack Edit the CAS R1 or CAS R2 script to adapt the variant Select CAS R1 tone type Set CAS R2 backward digits string	Modify profile	Create a CAS NAP

Media Gateway

(Step 1) Configure Media Gateway for H.248 mode	(Step 2) Add a New Media Gateway Controller	(Step 3) Associate NAPs Resources to H.248 Configuration
Configure the Media Gateway for H.248 mode Create a new H.248 configuration	Add a new media gateway controller (MGC)	Associate the NAPs with the H.248 configuration Select timeslots for the TDM interfaces

[edit]

Early Media

Q.1912.5 Profile A-B
Configure NAP Configure Profile

Q.1912.5 Profile C (SIP-I)
Configure NAP Configure Profile

RFC3398
Configure NAP Configure Profile

Q.699
Configure NAP Configure Profile

[edit]

Process
Modify LNP profile Edit termination cause codes Optional: configure the all_call_query.rb or query_on_release.rb routing script

Relay
Edit termination cause codes

Drop
Edit termination cause codes Uncheck Forward SS7 raw message bytes in the gateway configuration

Return to Web Portal 2.8 Home Page

@@ Line 1: / Line 1: @@
 {{DISPLAYTITLE:Web Portal 2.8: Protocol Stacks}}
+__NOTOC__
-=Protocol Stacks=
+=ISDN FAS and NFAS=
-==ISDN FAS and NFAS==
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 35: / Line 34: @@
 |}
-===''ISDN Advanced Features''===
+'''ISDN Advanced Features'''
-<div class="mw-collapsible mw-collapsed" data-collapsetext="ISDN NFAS Overlap" data-expandtext="ISDN NFAS Overlap" style="width: 400px;">
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 46: / Line 43: @@
 |}
-</div>
-<br><br>
-==CAS==
+=CAS=
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 76: / Line 72: @@
 |}
-==SIP==
+=SIP=
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 100: / Line 96: @@
 |}
-===SIP Advanced Features===
+'''IP Advanced Features'''
-<div class="mw-collapsible mw-collapsed" data-collapsetext="SIP-I SIP-T" data-expandtext="SIP-I SIP-T" style="width: 400px;">
 {| cellpadding="5" border="1" class="wikitable"
 |-
@@ Line 109: / Line 105: @@
 *[[Enabling_SIP_I_SIP_T_C|Enable SIP-I SIP-T]]
 |}
-</div>
-<div class="mw-collapsible mw-collapsed" data-collapsetext="SIP Spiral" data-expandtext="SIP Spiral" style="width: 400px;">
 {| cellpadding="5" border="1" class="wikitable"
 |-
@@ Line 119: / Line 114: @@
 |}
-</div>
-<div class="mw-collapsible mw-collapsed" data-collapsetext="NAT traversal" data-expandtext="NAT traversal" style="width: 400px;">
 {| cellpadding="5" border="1" class="wikitable"
 |-
@@ Line 133: / Line 126: @@
 *[[Enabling_Local_NAT_Traversal_B|Enable Local NAT Traversal]]
 |}
-</div>
-<div class="mw-collapsible mw-collapsed" data-collapsetext="DNS" data-expandtext="DNS" style="width: 400px;">
 {| cellpadding="5" border="1" class="wikitable"
 |-
@@ Line 143: / Line 134: @@
 *[[Toolpack:Configuring_DNS_Parameters_B|Enable DNS]]
 |}
-</div>
-==SS7 ISUP==
+=SS7 ISUP=
-===MTP2-MTP3-ISUP===
+'''MTP2-MTP3-ISUP'''
@@ Line 194: / Line 184: @@
 |}
-===M2PA-MTP3-ISUP===
+'''M2PA-MTP3-ISUP'''
@@ Line 241: / Line 231: @@
 |}
-===M3UA-ISUP===
+'''M3UA-ISUP'''
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 307: / Line 297: @@
 |}
-===SS7 Advanced Features===
+'''SS7 Advanced Features'''
-<div class="mw-collapsible mw-collapsed" data-collapsetext="SS7 SPIROU configuration" data-expandtext="SS7 SPIROU configuration" style="width: 400px;">
 {| cellpadding="5" border="1" class="wikitable"
 |-
@@ Line 322: / Line 311: @@
 |}
-</div>
-==SCCP-TCAP==
+=SCCP-TCAP=
-===MTP2-MTP3-SCCP-TCAP===
+'''MTP2-MTP3-SCCP-TCAP'''
@@ Line 376: / Line 364: @@
 |}
-===M2PA-MTP3-SCCP-TCAP===
+'''M2PA-MTP3-SCCP-TCAP'''
@@ Line 424: / Line 412: @@
 |}
-===M3UA-SCCP-TCAP===
+'''M3UA-SCCP-TCAP'''
 {| cellpadding="5" border="1" class="wikitable"
 |-
@@ Line 461: / Line 449: @@
 |}
-==H.248 MEGACO==
+=H.248 MEGACO=
 If the Tmedia is used to forward signalling messages to the SSW, you will require to configure M2UA, M3UA or IUA before configuring H.248.
@@ Line 467: / Line 455: @@
 If the Tmedia is used to connect media only, then you can go straight to [[#H.248|H.248 Configuration]]
-===Signaling===
+'''Signaling'''
-====M2UA====
+''M2UA''
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 498: / Line 487: @@
 |}
-====M3UA====
+''M3UA''
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 536: / Line 525: @@
 |}
-====IUA====
+''IUA''
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 559: / Line 548: @@
 |}
-===Media===
+'''Media'''
-====TDM NAP (for ISUP/ISDN)====
+''TDM NAP (for ISUP/ISDN)''
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 578: / Line 567: @@
 |}
-====VOIP NAP (for SIP)====
+''VOIP NAP (for SIP)''
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 594: / Line 583: @@
 |}
-====CAS NAP====
+''CAS NAP''
 {| cellpadding="5" border="1" class="wikitable"
 |-
@@ Line 620: / Line 609: @@
 |}
-===Media Gateway===
+'''Media Gateway'''
 {| cellpadding="5" border="1" class="wikitable"
@@ Line 644: / Line 633: @@
 =Protocol Interoperability=
-===Early Media===
+'''Early Media'''
-{|
-|STYLE="vertical-align: top"|
 {| cellpadding="5" border="1" class="wikitable"
 ! width="240" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | Q.1912.5 Profile A-B
@@ Line 656: / Line 643: @@
 |}
-|STYLE="vertical-align: top"|
 {| cellpadding="5" border="1" class="wikitable"
 ! width="240" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | Q.1912.5 Profile C (SIP-I)
@@ Line 665: / Line 652: @@
 |}
-|STYLE="vertical-align: top"|
 {| cellpadding="5" border="1" class="wikitable"
 ! width="240" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | RFC3398
@@ Line 674: / Line 661: @@
 |}
-|STYLE="vertical-align: top"|
 {| cellpadding="5" border="1" class="wikitable"
 ! width="240" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | Q.699
@@ Line 682: / Line 669: @@
 *[[Toolpack:Configure_Early_Media_Q699_Profile_A|Configure Profile]]
-|}
 |}
@@ Line 688: / Line 674: @@
 =Redirection Scenarios=
-{|
-|STYLE="vertical-align: top"|
 {| cellpadding="5" border="1" class="wikitable"
 ! width="240" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | Process
@@ Line 699: / Line 684: @@
 |}
-|STYLE="vertical-align: top"|
 {| cellpadding="5" border="1" class="wikitable"
 ! width="240" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | Relay
@@ Line 707: / Line 692: @@
 |}
-|STYLE="vertical-align: top"|
 {| cellpadding="5" border="1" class="wikitable"
 ! width="240" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | Drop
@@ Line 716: / Line 701: @@
 |}
-|}
+<headertabs/>
+'''{{#switchtablink:Protocol Stack|Return to Web Portal 2.8 Home Page|Web_Portal_Tutorial_Guide_v2.8}}'''