Revision as of 09:42, 18 July 2018

Protocol Stacks

ISDN FAS and NFAS

(Step 1) Allocate Physical Interfaces	(Step 2) Configure ISDN-PRI Signaling	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create Line interfaces Create Line Services	Configure an ISDN stack OR Configure NFAS	Modify profile	Allocate an ISDN NAP

ISDN Advanced Features

ISDN Overlap Sending
ISDN NFAS Overlap Parameters

CAS

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring a CAS stack	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create Line Interfaces Create Line services	Copy variant script Create CAS stack Edit the CAS R1 or CAS R2 script to adapt the variant Select CAS R1 tone type Set CAS R2 backward digits string	Modify profile	Create a CAS NAP

SIP

(Step 1) Configure IP port range	(Step 2) Configure SIP Signaling	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create an IP port range	Create a SIP stack Create a SIP transport server	Modify profile	Allocate a SIP NAP

SIP Advanced Features

SIP-I SIP-T
Enable SIP-I SIP-T

SIP Spiral
Enable SIP Spiral

Remote NAT Traversal	Local NAT Traversal
Enable Remote NAT Traversal	Enable Local NAT Traversal

DNS
Enable DNS

SS7 ISUP

MTP2-MTP3-ISUP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the MTP2 Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the ISUP Layer	(Step 5) Modify NAP profile	(Step 6) Configure Network Access Points (NAPs)
Create a new line interface Create a new line service	Create an MTP2 Configuration Create an MTP2 Link	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an ISUP Stack Create an ISUP Network Create an ISUP User Part Create an ISUP Interface Create ISUP CIC Groups	Modify profile	Create an ISUP NAP

M2PA-MTP3-ISUP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the M2PA Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the ISUP Layer	(Step 5) Modify NAP profile	(Step 6) Configure Network Access Points (NAPs)
Create a line interface Create a line service	Create the SCTP Configuration Create an M2PA Configuration Create an M2PA SAP Add M2PA Links	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an ISUP Stack Create an ISUP Network Create an ISUP User Part Create an ISUP Interface Create ISUP CIC Groups	Modify profile	Create an ISUP NAP

M3UA-ISUP

(Step 1) Allocate Physical Interfaces	(Step 2a) Configuring the M3UA Layer - IPSP	(Step 2b) Configuring the M3UA Layer - SGP	(Step 3) Configuring the ISUP Layer	(Step 4) Modify NAP profile	(Step 5) Configure Network Access Points (NAPs)
Create new line interface Create new line service	Create the SCTP Configuration Create SS7 Point Codes Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route	Create the SCTP Configuration Create SS7 Point Codes Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route	Create an ISUP Stack Create an ISUP Network Create an ISUP User Part Create an ISUP Interface Create ISUP CIC Groups	Modify profile	Create an ISUP NAP

SS7 Advanced Features

Configuring SPIROU
Modifying Profile Modifying Gateway Configurations Modifying ISUP Stack Modifying ISUP Userpart Optional modifications

SCCP-TCAP

MTP2-MTP3-SCCP-TCAP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the MTP2 Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the SCCP Layer	(Step 5) Configuring the TCAP Layer (optional)
Create new line interface Create new line service	Create an MTP2 Configuration Create an MTP2 Link	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an SCCP Stack Create an SCCP Network Create an SCCP Userpart Create an SCCP LSAP Create an SCCP Route Create an SCCP SSN Create an SCCP GTT Association Create an SCCP GTT Address Map	Create a TCAP Stack Create a TCAP Userpart Activating the Configuration

M2PA-MTP3-SCCP-TCAP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring the M2PA Layer	(Step 3) Configuring the MTP3 Layer	(Step 4) Configuring the SCCP Layer	(Step 5) Configuring the TCAP Layer (optional)
Create a line interface Create a line service	Create the SCTP Configuration Create an M2PA Configuration Create an M2PA SAP Add M2PA Links	Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Point Code Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Create an SCCP Stack Create an SCCP Network Create an SCCP Userpart Create an SCCP LSAP Create an SCCP Route Create an SCCP SSN Create an SCCP GTT Association Create an SCCP GTT Address Map	Create a TCAP Stack Create a TCAP Userpart Activating the Configuration

M3UA-SCCP-TCAP

(Step 1) Configuring the M3UA Layer	(Step 2) Configuring the SCCP Layer	(Step 3) Configuring the TCAP Layer (optional)
Create the SCTP Configuration Create SS7 Point Codes Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route	Create an SCCP Stack Create an SCCP Network Create an SCCP Userpart Create an SCCP LSAP Create an SCCP Route Create an SCCP SSN Create an SCCP GTT Association Create an SCCP GTT Address Map	Create a TCAP Stack Create a TCAP Userpart Activating the Configuration

H.248 MEGACO

If the Tmedia is used to forward signalling messages to the SSW, you will require to configure M2UA, M3UA or IUA before configuring H.248.

If the Tmedia is used to connect media only, then you can go straight to H.248 Configuration

Signaling

M2UA

(Step 1) Create Line Interfaces	(Step 2) Create MTP2 links	(Step 3) Create M2UA configuration
Create a line interface Create a line service	Create an MTP2 Configuration Create MTP2 Links	Create the SCTP Configuration Create an M2UA Configuration Create an M2UA SAP Create an M2UA Cluster Create M2UA Links Create M2UA Peers

M3UA

(Step 1) Create Line Interfaces	(Step 2) Create MTP2 links	(Step 3) Create MTP3 configuration	(Step 4) Create M3UA configuration
Create a line interface Create a line service	Create an MTP2 Configuration Create MTP2 Links	Create SS7 Point Codes Create an MTP3 Configuration Create an MTP3 Network Create an MTP3 Linkset Create MTP3 Links Create an MTP3 Route	Edit the SCTP Configuration Create an M3UA Configuration Create an M3UA SAP Create an M3UA Network Create an M3UA User Part Create an M3UA Peer Signalling Process Create an M3UA Peer Server Create an M3UA Route

IUA

(Step 1) Create Line Interfaces	(Step 2) Create IUA Configuration
Create a line interface Create a line service	Create the SCTP Configuration Create an IUA Configuration Create an IUA SAP Create an IUA Cluster Create IUA Links Create IUA Peers

Media

TDM NAP (for ISUP/ISDN)

(Step 1) Allocate TDM Physical Interfaces	(Step 2) Modify NAP profile	(Step 3) Configure Network Access Points (NAPs)
Create a line interface Create a line service	Modify profile	Allocate a TDM NAP

VOIP NAP (for SIP)

(Step 1) Create IP Port Ranges	(Step 2) Modify NAP profile	(Step 3) Configure Network Access Points (NAPs)
Create IP port ranges	Modify profile	Allocate a VoIP NAP

CAS NAP

(Step 1) Allocate Physical Interfaces	(Step 2) Configuring a CAS stack	(Step 3) Modify NAP profile	(Step 4) Configure Network Access Points (NAPs)
Create a line interfaces Create a line service	Copy variant script Create CAS stack Edit the CAS R1 or CAS R2 script to adapt the variant Select CAS R1 tone type Set CAS R2 backward digits string	Modify profile	Create a CAS NAP

Media Gateway

(Step 1) Configure Media Gateway for H.248 mode	(Step 2) Add a New Media Gateway Controller	(Step 3) Associate NAPs Resources to H.248 Configuration
Configure the Media Gateway for H.248 mode Create a new H.248 configuration	Add a new media gateway controller (MGC)	Associate the NAPs with the H.248 configuration Select timeslots for the TDM interfaces

Protocol Interoperability

Early Media

Q.1912.5 Profile A-B
Configure NAP Configure Profile

Q.1912.5 Profile C (SIP-I)
Configure NAP Configure Profile

RFC3398
Configure NAP Configure Profile

Q.699
Configure NAP Configure Profile

Redirection

General configuration

When using SIP, ensure that the Allow Recurse parameter in the SIP stack is unchecked so that Toolpack can handle redirections.

When configuring termination cause codes, use the following table as a guide. The Drop column represents codes to use when redirection contents should be dropped and the call should be terminated with the specified code. The Forward column represents codes to use when redirection contents should be forwarded to the incoming leg with the specified code. If the redirection requests must be processed, the codes are not used.

Code	Drop		Forward
Code	SS7	SIP	SS7	SIP
14	21	603	14	300
22	21	410	22	301
23	21	410	23	302
300	21	603	23	300
301	21	410	22	301
302	21	410	23	302
305	21	603	23	305
380	21	603	23	380

For each redirection cause code, choose Process to let the routing scripts process the redirection. Choose Stop to drop calls when receiving a redirection and use the above table to specify if the redirection contents should be dropped.

Scenarios

Process
Modify LNP profile Edit termination cause codes Optional: configure the all_call_query.rb or query_on_release.rb routing script

Relay
Edit termination cause codes

Drop
Edit termination cause codes Uncheck Forward SS7 raw message bytes in the gateway configuration

@@ Line 413: / Line 413: @@
 ===M3UA-SCCP-TCAP===
+{| cellpadding="5" border="1" class="wikitable"
+|-
+! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 1) <br>Configuring the M3UA Layer
+! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 2) <br>Configuring the SCCP Layer
+! width="200" style="background: rgb(239, 239, 239) none repeat scroll 0% 0%; -moz-background-clip: border; -moz-background-origin: padding; -moz-background-inline-policy: continuous;" | (Step 3) <br>Configuring the TCAP Layer (optional)
+|-
+| valign="top" |
+*[[Toolpack:Creating the SCTP Configuration D|Create the SCTP Configuration]]
+*[[Toolpack:Creating SS7 Point Codes D|Create SS7 Point Codes]]
+*[[Toolpack:Creating an M3UA Configuration (IPSP) D|Create an M3UA Configuration]]
+**[[Toolpack:Creating an M3UA SAP (IPSP) C|Create an M3UA SAP]]
+**[[Toolpack:Creating an M3UA Network (IPSP) C|Create an M3UA Network]]
+**[[Toolpack:Creating_an_M3UA_User_Part_(IPSP)_C|Create an M3UA User Part]]
+**[[Toolpack:Creating an M3UA Peer Signalling Process (IPSP) C|Create an M3UA Peer Signalling Process]]
+**[[Toolpack:Creating_an_M3UA_Peer_Server_(IPSP)_C|Create an M3UA Peer Server]]
+**[[Toolpack:Creating an M3UA Route (IPSP) C|Create an M3UA Route]]
+| valign="top" |
+*[[Toolpack:Creating_an_SCCP_Stack C| Create an SCCP Stack]]
+*[[Toolpack:Creating_an_SCCP_Network C|Create an SCCP Network]]
+**[[Toolpack:Creating_an_SCCP_Userpart C|Create an SCCP Userpart]]
+**[[Toolpack:Creating_an_SCCP_LSAP C|Create an SCCP LSAP]]
+***[[Toolpack:Creating_an_SCCP_Route C|Create an SCCP Route]]
+****[[Toolpack:Creating_an_SCCP_SSN C|Create an SCCP SSN]]
+*[[Toolpack:Creating_an_SCCP_GTT_Association C|Create an SCCP GTT Association]]
+**[[Toolpack:Creating_an_SCCP_GTT_Address_Map C|Create an SCCP GTT Address Map]]
+| valign="top" |
+*[[Toolpack:Creating_a_TCAP_Stack C|Create a TCAP Stack]]
+**[[Toolpack:Creating_a_TCAP_Userpart C| Create a TCAP Userpart]]
+*[[Toolpack:Activating_the_Configuration D|Activating the Configuration]]
+|}
 ==H.248 MEGACO==

Toolpack:Protocol Stack Settings A: Difference between revisions