Actions

Modifying ISUP Stack for SPIROU

Revision as of 15:11, 1 December 2020 by Allyntree (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This article applies to: Product Version
Tmedia 2.8, 2.9, 2.10, 3.0, 3.2

This article assumes that SS7 ISUP is configured.


Note, that if you want to eventually validate SPIROU configuration, you will need to repeat these steps for all the ISUP stacks in your current configuration..


1- Select ISUP from the navigation panel

ModifyIsupForSpirou 0.png


2- Select the ISUP stack you wishto configure.

ModifyIsupForSpirou 1.png


3- Expand the Advanced Parameters section and set the following parameters:

  • No confusion must be selected
  • Click Save

ModifyIsupForSpirou 2.png


4- Verify that the "IsupStack was successfully updated" message is displayed

ModifyIsupForSpirou 3.png


List of Parameters