Setting the Role to a Secondary Unit in a 1+1 System

Revision as of 10:05, 11 November 2020 by Allyntree (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This article applies to: Product Version
Tmedia 2.8, 2.9, 2.10, 3.0, 3.2

The first time that you connect to a gateway, the web portal setup wizard will be displayed and you will be asked to select how you would like to configure the role of the gateway. Your choices are standalone, primary, or secondary. Once the role configuration settings are applied, the gateway will start up and display the web portal configuration management tool.

To configure the host role of the gateway as the secondary unit in a 1+1 system, do the following:

1- When the setup wizard is displayed, click Continue

HostRoleSecondary 0 A.png

2- Select As part of a 1+1 redundant system and click Continue.

HostRoleSecondary 1 A.png

3- Select The secondary unit and click Continue.

HostRoleSecondary 2 A.png

4- If you need to change the default subnet address or subnet mask, click change internal subnets and proceed to step 4a, otherwise click Continue and go to step 5.

HostRoleSecondary 3 A.png

4a- Enter the subnet address and subnet mask for each VLAN ID and click Continue.

HostRoleSecondary 4 A.png

5- Follow the onscreen instructions and connect the two units together. When you have completed the connections, click Continue.

HostRoleSecondary 5 A.png

6- Once you are satisfied with your settings, click Confirm.

HostRoleSecondary 6 A.png

Allow for the host role changes to take effect.

HostRoleSecondary 7 A.png

7- The Web Portal Log On page is displayed.

  • Enter the user name and password.

HostRoleSecondary 8 A.png