Actions

Toolpack:Host 1Plus1 Primary A: Difference between revisions

Line 23: Line 23:




3- Select '''As part of a 1+1 redundant system''' and click '''Continue'''.
4- When you are asked if the unit should get configuration and packages from an existing secondary unit, select '''No''' and click '''Continue'''.


[[Image:HostRolePrimary_3_A.png]]
[[Image:HostRolePrimary_3_A.png]]




4- When you are asked if the unit should get configuration and packages from an existing secondary unit, select '''No''' and click '''Continue'''.
5- Enter the VLAN IDS to use for the control network and click '''Continue'''.


[[Image:HostRolePrimary_4_A.png]]
[[Image:HostRolePrimary_4_A.png]]




5- Enter the VLAN IDS to use for the control network and click '''Continue'''.
6- Enter the Subnet addree and subnet mask for each VLAN ID and click '''Continue'''.


[[Image:HostRolePrimary_5_A.png]]
[[Image:HostRolePrimary_5_A.png]]




6- Enter the Subnet addree and subnet mask for each VLAN ID and click '''Continue'''.
7- Once you are satisfied with your settings, click '''Confirm'''.


[[Image:HostRolePrimary_6_A.png]]
[[Image:HostRolePrimary_6_A.png]]




7- Once you are satisfied with your settings, click '''Confirm'''.
Allow  for the changes to take effect.


[[Image:HostRolePrimary_7_A.png]]
[[Image:HostRolePrimary_7_A.png]]
Allow  for the changes to take effect.
[[Image:HostRolePrimary_8_A.png]]




Line 56: Line 51:
* Enter the '''user name''' and '''password'''.
* Enter the '''user name''' and '''password'''.


[[Image:HostRolePrimary_9_A.png]]
[[Image:HostRolePrimary_8_A.png]]

Revision as of 17:29, 29 January 2015

Applies to version v2.8

The first time that you connect to a gateway, the web portal will appear and you will be asked to select how you would like to configure its role, which can be either standalone, primary, or secondary. Once the configuration settings are applied, the gateway will start up and display the web portal configuration management tool.

To configure the host role of the gateway as the primary unit in a 1+1 system, do the following:


1- When the setup wizard is displayed, click Continue

HostRolePrimary 0 A.png


2- Select As part of a 1+1 redundant system and click Continue.

HostRolePrimary 1 A.png


3- Select The primary unit and click Continue.

HostRolePrimary 2 A.png


4- When you are asked if the unit should get configuration and packages from an existing secondary unit, select No and click Continue.

HostRolePrimary 3 A.png


5- Enter the VLAN IDS to use for the control network and click Continue.

HostRolePrimary 4 A.png


6- Enter the Subnet addree and subnet mask for each VLAN ID and click Continue.

HostRolePrimary 5 A.png


7- Once you are satisfied with your settings, click Confirm.

HostRolePrimary 6 A.png


Allow for the changes to take effect.

HostRolePrimary 7 A.png


8- The Web Portal Log On page is displayed.

  • Enter the user name and password.

HostRolePrimary 8 A.png