View source for Toolpack:Creating the M2PA Configuration D

{{DISPLAYTITLE:Creating the M2PA Configuration}}
{| class="wikitable"
|-
|rowspan="3"|This article applies to:
|'''Product'''
|'''Version'''
|-
|Tmedia
|2.9, 2.10, 3.0, 3.2
|}
 
To create an M2PA configuration:

1- Select '''M2PA''' from the navigation panel

[[Image:CreateM2pa_0.png]]

2- Configure the M2PA service

* Make sure the box labelled '''Enabled''' is '''checked'''
* Enter a '''name''' for the M2PA service
* Click '''Create'''

[[Image:CreateM2pa_1.png]]

3- Verify that the '''"M2ua Cfg was successfully created"''' message appears

[[Image:CreateM2pa_2.png]]


<div class="mw-collapsible mw-collapsed" data-collapsetext="Northbound Interface" data-expandtext="Northbound Interface" style="width: 400px;">

'''Path'''
<pre>
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]
</pre>

'''Parameters (text)'''
<pre>
/configurations/@[configuration_name]/hardware_units/@[hardware_name]/m2pa_stacks/@[m2pa_name]
enabled         = true
name            = "@[m2pa_name]"
sctp_poll_timer = "1 second"
</pre>

'''Parameters (json)'''
<pre>
{
  "enabled" : true,
  "name" : "@[m2pa_name]",
  "sctp_poll_timer" : "1 second",
  "m2pa_saps" : {
  }
}
</pre>
</div>


==List of Parameter==

* [[Parameter: Name|Name]]