View source for Toolpack:Creating an SNMP Trap Destination C

{{DISPLAYTITLE:Creating an SNMP Trap Destination}}
{| class="wikitable"
|-
|rowspan="3"|This article applies to:
|'''Product'''
|'''Version'''
|-
|Tmedia
|2.9, 2.10, 3.0, 3.2
|-
|SBC
|3.0, 3.1
|}

SNMP traps are automatically generated on TMedia platforms by the NetSNMP installation, which monitors hardware and software interfaces registered with the ifTable of the IF-MIB module. When the operation status of an interface changes, a trap is generated by NetSNMP, and sent to a destination address for processing. In order for traps to be generated, an '''SNMP trap destination''' must be defined in the Web Portal.
<br/><br/>
To create an SNMP trap destination, do the following:
<br/>
'''NOTE:''' The procedure will vary, dependng on whether you create a trap destination for SNMPv1/v2, or for SNMPv3.
<br/><br/>

1-Click '''Services''' in the navigation panel.

[[Image:Snmp_cfg_A_0.png]]
<br/><br/>

2-Select the '''SNMP''' tab.

[[Image:Snmp_cfg_A_1.png]]

<br/><br/>

3-'''Create New SNMP Trap Destination'''

[[Image:Snmp_Trap_0.png]]
<br/><br/>

<u>Creating an SNMPv1/v2 Trap Destination</u>
*In the trap destination configuration panel, set the following parameters '''if you are creating a trap destination for SNMPv1/v2''':
**Enter a '''name''' to identify the trap destination
**Enter a destination '''IP Address''' for sending generated traps
**Enter a destination '''port number''', on which to send generated traps (standard default value is 162)
**Select version 1 or 2 from '''SNMP Version'''
**Enter the name of the SNMPv1/v2 '''community''' to use (configured previously)
**Click '''Create'''
[[Image:Snmp_Trap_1.png]]
<br/><br/>

<u>Creating an SNMPv3 Trap Destination</u>
*In the trap destination configuration panel, set the following parameters '''if you are creating a trap destination for SNMPv3''':
**Enter a '''name''' to identify the trap destination
**Enter a destination '''IP Address''' for sending generated traps
**Enter a destination '''port number''', on which to send generated traps (standard default value is 162)
**Select version 3 from '''SNMP Version'''
**Enter the name of the SNMPv3 '''user''' to use (configured previously)
**Select a security level for the user from the '''security level''' drop-down box
**Select an appropriate '''authentication algorithm''' for the user from the '''authentication''' drop-down box
**Enter the appropriate authentication '''pass phrase''' for the user
**Select an appropriate '''privacy standard''' for the user from the '''privacy protocol''' drop-down box
**Enter the appropriate authentication '''privacy phrase''' for the user
**Click '''Create'''
[[Image:Snmp_Trap_1a.png]]
<br/><br/>

*Verify that the '''"SNMP Trap Destination was Successfully Created"''' message is displayed and that the new SNMP trap destination appears in the '''SNMP Trap Destinations''' list

[[Image:Snmp_Trap_A_5.png]]
<br/><br/>

<div class="mw-collapsible mw-collapsed" data-collapsetext="Northbound Interface" data-expandtext="Northbound Interface" style="width: 400px;">

'''Path'''
<pre>
/configurations/@[configuration_name]/snmp_services/configuration/trap_destinations/@[snmpTrap_name]
</pre>

'''Parameters (text)'''
<pre>
/configurations/@[configuration_name]/snmp_services/configuration/trap_destinations/@[snmpTrap_name]

authentication      = "MD5"
community           = ""
destination_ip      = "10.3.2.163"
destination_port    = 162
name                = "SNMP_Admin"
password_phrase     = "Not Shown"
privacy_phrase      = "Not Shown"
privacy_protocol    = "DES"
security_level      = "Authentication and privacy"
snmp_version        = "SNMPv3"
source_ip_interface = "ANY"
username            = "private"
</pre>

'''Parameters (json)'''
<pre>
{
  "authentication" : "MD5",
  "community" : "",
  "destination_ip" : "10.3.2.163",
  "destination_port" : 162,
  "name" : "SNMP_Admin",
  "password_phrase" : "Not Shown",
  "privacy_phrase" : "Not Shown",
  "privacy_protocol" : "DES",
  "security_level" : "Authentication and privacy",
  "snmp_version" : "SNMPv3",
  "source_ip_interface" : "ANY",
  "username" : "private"
}
</pre>
</div>



==List of Parameters==


*SNMPv1/v2
** [[Parameter: Name|Name]]
** [[Parameter: Destination IP address or domain|Destination IP address or domain]]
** [[Parameter: Destination Port|Destination Port]]
** [[Parameter: SNMP Version|SNMP Version]]
** [[Parameter: Community|Community]]

*SNMPv3
** [[Parameter: Name|Name]]
** [[Parameter: Destination IP address or domain|Destination IP address or domain]]
** [[Parameter: Destination Port|Destination Port]]
** [[Parameter: SNMP Version|SNMP Version]]
** [[Parameter: Username|Username]]
** [[Parameter: Security Level|Security Level]]
** [[Parameter: Authentication|Authentication]]
** [[Parameter: Passwrod phrase|Password phrase]]
** [[Parameter: Privacy protocol|Privacy protocol]]
** [[Parameter: Privacy phrase|Privacy phrase]]