Actions

Creating an SCCP Route

Revision as of 14:53, 2 December 2015 by Allyntree (talk | contribs) (Created page with "=== '''''Applies to version(s): v2.9''''' === {{DISPLAYTITLE:Creating an SCCP Route}} Now that you have created an SCCP LSAP, you must create a new [[Toolpack:Create_a...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version(s): v2.9

Now that you have created an SCCP LSAP, you must create a new SCCP route for your system. This step in the Web Portal configuration exists to create a route to a specific destination point code (DPC).

To Create an SCCP Route:


1- Select SCCP from the navigation panel


Create SCCP Stack 0.png


2- Select an SCCP Network


Select SCCP Network 0.png


3- Select an SCCP LSAP


Select SCCP LSAP 0.png


4- Click Create new Sccp Route in the SCCP LSAP configuration window

Create SCCP Route 0.png


5- Configure the new SCCP Route:

Create SCCP Route 1.png


6- Verify that the "SccpRoute was successfully created" message appears

Create SCCP Route 2.png


7- Configure SCCP Route Backup Point Code

Create SCCP Route 3.png

  • Note: For each selected point codes, a valid SCCP route must exist.


Path


Parameters (text)


Parameters (json)



List of Parameters

Advanced Parameters