Toolpack:Creating an SCCP Route A: Difference between revisions

Latest revision as of 13:37, 26 September 2014

Applies to version(s): v2.5, v2.6, v2.7

Now that you have created an SCCP LSAP, you must create a new SCCP route for your system. This step in the Web Portal configuration exists to create a route to a specific destination point code (DPC).

To Create an SCCP Route:

1- Click Create new Sccp Route in the SCCP LSAP configuration window

2- Configure the new SCCP Route:

Choose a Name for the new route
Select a Protocol Variant
Select a Replication Mode (ANSI96 and TELCORDIA variants)
Select an SLS Mask (ANSI and TELCORDIA protocol variants)
Select a Destination Point Code for this route
Click Create

3- Verify that the "SccpRoute was successfully created" message appears

4- Configure SCCP Route Backup Point Code

Assign Backup Point Codes to use in case this route's DPC is not available.

Note: For each selected point codes, a valid SCCP route must exist.

5- Next Step: Create an SCCP SSN

List of Parameters

Name
Protocol Variant
Replication Mode
SLS Mask (For ANSI and TELCORDIA variants only)
Destination Point Code

Navigation

Previous	Next
Create an SCCP LSAP	Create an SCCP SSN

@@ Line 1: / Line 1: @@
-==To Create an SCCP Route==
+=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' ===
+{{DISPLAYTITLE:Creating an SCCP Route}}
+Now that you have created an [[SCCP]] [[LSAP]], you must create a new [[Toolpack:Create_an_SCCP_Route|SCCP route]] for your system.
+This step in the Web Portal configuration exists to create a route to a specific destination point code (DPC).
-'''1. Click 'Create new Sccp Route' from the SCCP LSAP configuration window'''
+To Create an SCCP Route:
-[[Image:Web_Portal_v2.3_Create_SCCP_Route.png|700px]]
-'''2. Configure the new SCCP Route'''
+- Click '''Create new Sccp Route''' in the SCCP LSAP configuration window
-*Choose a name for the new route
-*Select a protocol variant
-*Select a replicant mode
-*Select an SLS mask
-*Select a destination point code
-*Click 'Create'
-[[Image:Web_Portal_v2.3_Creating_SCCP_Route.png|700px]]
+[[Image:Toolpack_v2.5_Create_SCCP_Route.png]]
-'''3. Verify that the 'SccpRoute was successfully created' message appears'''
+- Configure the new SCCP Route:
-[[Image:Web_Portal_v2.3_SCCP_Route_Created.png|700px]]
+* Choose a [[Parameter: Name|Name]] for the new route
+* Select a [[Parameter: Protocol Type|Protocol Variant]]
+* Select a [[Parameter: Replication Mode|Replication Mode]] (ANSI96 and TELCORDIA variants)
+* Select an [[Parameter: SLS Mask|SLS Mask]] (ANSI and TELCORDIA protocol variants)
+* Select a [[Parameter: Destination Point Code|Destination Point Code]] for this route
+* Click '''Create'''
+[[Image:Toolpack_v2.5_Creating_SCCP_Route.png]]
+- Verify that the '''"SccpRoute was successfully created"''' message appears
+[[Image:Toolpack_v2.5_SCCP_Route_Created.png]]
+- Configure [[SCCP Route Backup Point Code]]
+* Assign [[Parameter: SCCP Backup Point Code| Backup Point Codes]] to use in case this route's [[DPC]] is not available.
+[[Image:SCCP_Route_Backup_PC.png]]
+* '''Note: For each selected point codes, a valid SCCP route must exist'''.
+- '''Next Step:''' [[Toolpack_v2.5:Creating_an_SCCP_SSN|Create an SCCP SSN]]
+==List of Parameters==
+* [[Parameter: Name|Name]]
+* [[Parameter: Protocol Type|Protocol Variant]]
+* [[Parameter: Replication Mode|Replication Mode]]
+* [[Parameter: SLS Mask|SLS Mask]] (For ANSI and TELCORDIA variants only)
+* [[Parameter: Destination Point Code|Destination Point Code]]
+==Navigation==
+{| class="wikitable"
+|-
+! Previous !! Next
+|-
+| [[Toolpack_v2.5:Creating_an_SCCP_LSAP|Create an SCCP LSAP]] || [[Toolpack_v2.5:Creating_an_SCCP_SSN|Create an SCCP SSN]]
+|}