Actions

Toolpack:Creating an SCCP LSAP A: Difference between revisions

No edit summary
No edit summary
Line 1: Line 1:
=== '''''Applies to version(s): v2.5, v2.6.''''' ===
{{DISPLAYTITLE:Toolpack: Navigating the Web Portal}}
Now that you have created an [[SCCP]] network, you must create a new SCCP lower service access point ([[LSAP]]).
Now that you have created an [[SCCP]] network, you must create a new SCCP lower service access point ([[LSAP]]).



Revision as of 15:01, 6 June 2012

Applies to version(s): v2.5, v2.6.

Now that you have created an SCCP network, you must create a new SCCP lower service access point (LSAP).

Creating an LSAP tells the SCCP protocol layer about a collection of SS7 nodes that are accessible through MTP3.

To Create an SCCP LSAP:


1- Click Create New SCCP LSAP in the SCCP network configuration window

Toolpack v2.5 Create SCCP LSAP.png

2- Configure the new SCCP LSAP:

  • Enter a Name for the LSAP
  • Click Save

Toolpack v2.5 Creating SCCP LSAP.png

3- Verify that the "SccpLsap was successfully created" message appears

Toolpack v2.5 SCCP LSAP Created.png


4- Next Step: Create an SCCP Route

List of Parameters

Navigation

Previous Next
Create an SCCP Userpart Create an SCCP Route