Actions

Toolpack:Creating an SCCP LSAP A: Difference between revisions

No edit summary
No edit summary
Line 1: Line 1:
Now that you have created an SCCP user part, you must create a new SCCP lower service access point (LSAP).
Now that you have created an [[SCCP]] network, you must create a new SCCP lower service access point ([[LSAP]]).


Creating an [[Toolpack:Create_an_SCCP_LSAP|LSAP]] tells the [[SCCP]] protocol layer about a collection of [[SS7]] nodes that are accessible through [[MTP3 Layer|MTP3]].
Creating an [[Toolpack:Create_an_SCCP_LSAP|LSAP]] tells the [[SCCP]] protocol layer about a collection of [[SS7]] nodes that are accessible through [[MTP3 Layer|MTP3]].
Line 6: Line 6:




1- Click '''Create New SCCP LSAP''' in the SCCP network configuration window
1- Click '''Create New SCCP LSAP''' in the [[SCCP]] network configuration window


[[Image:Toolpack_v2.5_Create_SCCP_LSAP.png]]
[[Image:Toolpack_v2.5_Create_SCCP_LSAP.png]]

Revision as of 12:53, 11 May 2012

Now that you have created an SCCP network, you must create a new SCCP lower service access point (LSAP).

Creating an LSAP tells the SCCP protocol layer about a collection of SS7 nodes that are accessible through MTP3.

To Create an SCCP LSAP:


1- Click Create New SCCP LSAP in the SCCP network configuration window

Toolpack v2.5 Create SCCP LSAP.png

2- Configure the new SCCP LSAP:

  • Enter a Name for the LSAP
  • Click Save

Toolpack v2.5 Creating SCCP LSAP.png

3- Verify that the "SccpLsap was successfully created" message appears

Toolpack v2.5 SCCP LSAP Created.png


List of Parameters

Navigation

Previous Next
Create an SCCP Userpart Create an SCCP Route