Creating an MTP3 Linkset

Revision as of 14:21, 15 July 2013 by Allyntree (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version(s): v2.5, v2.6., v2.7

Now that you have created an MTP3 network, you are ready to create an MTP3 linkset. This can be done through the MTP3 network configuration window. A linkset is used to logically combine multiple MTP3 links going to the same DPC into a single entity. One linkset could be the links between a point code identifying the Tmedia/Tdev SS7 node and a point code identifying the adjacent SS7 equipment.

To create an MTP3 linkset:

1- Click Create New Mtp3 Linkset in the MTP3 Network configuration panel

Toolpack v2.5 Create MTP3 Linkset.png

2- Configure the new linkset:

  • Enter a name for the linkset
  • Select an origin point code (OPC)
  • Select an adjacent point code
  • Make sure the desired state is set to Active
  • Click Create

Toolpack v2.5 Creating MTP3 Linkset.png

3- Verify that the "Mtp3Linkset was successfully created" message appears

Toolpack v2.5 MTP3 Linkset Created.png

List of Parameters