Actions

Creating an M3UA Route

Revision as of 18:48, 12 February 2014 by Cbilodeau (talk | contribs) (add text regarding the number of routes required)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version(s): v2.5, v2.6., v2.7

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC). To create an M3UA route:


1- Click Create New M3ua Route in the M3UA network configuration window

Toolpack v2.5 Create M3UA Route.png

2- Configure the new M3UA route:

  • Enter a name for the route
  • Select a route type
  • Select an M3UA peer server (choose Local Peer server, if associated with an OPC, select Remote Peer server, if using DPC)
  • Select an M3UA user part (select NONE, if associated with a DPC)
  • Select a point code
  • Select a point code mask (Recommended value: Exact-match)
  • Select a sub-service field type
  • Click Create

Toolpack v2.5 Creating M3UA Route.png

3- Verify that the "M3ua Route was successfully created" message appears

Toolpack v2.5 M3UA Route Created.png


List of Parameters