Toolpack:Creating an ISUP Stack D: Difference between revisions

Latest revision as of 14:41, 25 November 2020

This article applies to:	Product	Version
	Tmedia	2.9, 2.10, 3.0, 3.2

The ISDN user part (ISUP) is the highest layer in the SS7 signaling stack and is responsible for the handling of calls. Once you have configured the MTP3 layer of your SS7 system, you must create an ISDN user part stack.

To create an ISUP stack:

1- Click ISUP in the navigation panel.

2- Click Create New Stack

3- Configure the new ISUP stack:

Make sure the box labeled Enabled is checked
Enter a name for the stack
Select a primary hardware adapter
Select a secondary hardware adapter
Click Create

4- Verify that the "IsupStack was successfully created" message appears

Path

/configurations/@[configuration_name]/isup_stacks/@[isup_stack]

Parameters (text)

/configurations/@[configuration_name]/isup_stacks/@[isup_stack]
enabled                 = true
isup_options            = [ "Event information accept all values", "Extra called number bytes", "Extra calling number bytes" ]
name                    = "@[isup_stack]"
primary_hardware_unit   = "@[hardware_name]"
secondary_hardware_unit = ""

/configurations/@[configuration_name]/isup_stacks/@[isup_stack]/timers
first_group_msg_timer = "5 seconds"
t18_timer             = "15 seconds"
t19_timer             = "5 minutes"
t20_timer             = "15 seconds"
t21_timer             = "5 minutes"
t22_timer             = "15 seconds"
t23_timer             = "5 minutes"
t28_timer             = "10 seconds"

Parameters (json)

{
  "enabled" : true,
  "isup_options" : [
    "Event information accept all values",
    "Extra called number bytes",
    "Extra calling number bytes"
  ],
  "name" : "@[isup_stack]",
  "primary_hardware_unit" : "@[hardware_name]",
  "secondary_hardware_unit" : "",
  "timers" : {
    "first_group_msg_timer" : "5 seconds",
    "t18_timer" : "15 seconds",
    "t19_timer" : "5 minutes",
    "t20_timer" : "15 seconds",
    "t21_timer" : "5 minutes",
    "t22_timer" : "15 seconds",
    "t23_timer" : "5 minutes",
    "t28_timer" : "10 seconds"
  }
}

List of Parameters

Advanced

Options

@@ Line 1: / Line 1: @@
-=== '''''Applies to version(s): 2.9, 2.10, 3.0, 3.2''''' ===
 {{DISPLAYTITLE:Creating an ISUP Stack}}
+{| class="wikitable"
+|-
+|rowspan="3"|This article applies to:
+|'''Product'''
+|'''Version'''
+|-
+|Tmedia
+|2.9, 2.10, 3.0, 3.2
+|}
 The ISDN user part (ISUP) is the highest layer in the SS7  signaling stack and is responsible for the handling of calls.  Once you have configured the MTP3 layer of your SS7 system, you must create an ISDN user part stack.