View source for Toolpack:Creating an ISUP Stack D

{{DISPLAYTITLE:Creating an ISUP Stack}}
{| class="wikitable"
|-
|rowspan="3"|This article applies to:
|'''Product'''
|'''Version'''
|-
|Tmedia
|2.9, 2.10, 3.0, 3.2
|}

The ISDN user part (ISUP) is the highest layer in the SS7  signaling stack and is responsible for the handling of calls.  Once you have configured the MTP3 layer of your SS7 system, you must create an ISDN user part stack.

To create an ISUP stack:

1- Click '''ISUP''' in the navigation panel.

[[Image:CreateIsupStack_0.png]]


2- Click '''Create New Stack'''

[[Image:CreateIsupStack_1.png]]


3- Configure the new ISUP stack:

* Make sure the box labeled '''Enabled''' is '''checked'''
* Enter a '''name''' for the stack
* Select a '''primary hardware adapter'''
* Select a '''secondary hardware adapter'''
* Click '''Create'''

[[Image:CreateIsupStack_2.png]]


4- Verify that the '''"IsupStack was successfully created"''' message appears

[[Image:CreateIsupStack_3.png]]


<div class="mw-collapsible mw-collapsed" data-collapsetext="Northbound Interface" data-expandtext="Northbound Interface" style="width: 400px;">

'''Path'''
<pre>
/configurations/@[configuration_name]/isup_stacks/@[isup_stack]
</pre>

'''Parameters (text)'''
<pre>
/configurations/@[configuration_name]/isup_stacks/@[isup_stack]
enabled                 = true
isup_options            = [ "Event information accept all values", "Extra called number bytes", "Extra calling number bytes" ]
name                    = "@[isup_stack]"
primary_hardware_unit   = "@[hardware_name]"
secondary_hardware_unit = ""

/configurations/@[configuration_name]/isup_stacks/@[isup_stack]/timers
first_group_msg_timer = "5 seconds"
t18_timer             = "15 seconds"
t19_timer             = "5 minutes"
t20_timer             = "15 seconds"
t21_timer             = "5 minutes"
t22_timer             = "15 seconds"
t23_timer             = "5 minutes"
t28_timer             = "10 seconds"
</pre>

'''Parameters (json)'''
<pre>
{
  "enabled" : true,
  "isup_options" : [
    "Event information accept all values",
    "Extra called number bytes",
    "Extra calling number bytes"
  ],
  "name" : "@[isup_stack]",
  "primary_hardware_unit" : "@[hardware_name]",
  "secondary_hardware_unit" : "",
  "timers" : {
    "first_group_msg_timer" : "5 seconds",
    "t18_timer" : "15 seconds",
    "t19_timer" : "5 minutes",
    "t20_timer" : "15 seconds",
    "t21_timer" : "5 minutes",
    "t22_timer" : "15 seconds",
    "t23_timer" : "5 minutes",
    "t28_timer" : "10 seconds"
  }
}
</pre>
</div>


==List of Parameters==

* [[Parameter: Name|Name]]
* [[Parameter: Primary Hardware Adapter|Primary Hardware Adapter]]
* [[Parameter: Secondary Hardware Adapter|Secondary Hardware Adapter]]


<div class="mw-collapsible mw-collapsed" data-collapsetext="Timers" data-expandtext="Timers" style="width: 400px;">
{| class="wikitable"
|-

* [[Parameter: T18 Timer|T18 Timer]]
* [[Parameter: T19 Timer|T19 Timer]]
* [[Parameter: T20 Timer|T20 Timer]]
* [[Parameter: T21 Timer|T21 Timer]]
* [[Parameter: T22 Timer|T22 Timer]]
* [[Parameter: T23 Timer|T23 Timer]]
* [[Parameter: T28 Timer|T28 Timer]]
* [[Parameter: First Group Msg Timer|First Group Msg Timer]]
|}
</div>


'''Advanced'''
* [[Parameter: Isup_Options|Options]]