Actions

Creating an ISUP Stack

Revision as of 10:26, 15 July 2013 by Allyntree (talk | contribs) (Created page with "=== '''''Applies to version(s): v2.7.''''' === {{DISPLAYTITLE:Creating an ISUP Stack}} Now that you have configured the MTP3 layer of your SS7 system, you must create an ISDN ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version(s): v2.7.

Now that you have configured the MTP3 layer of your SS7 system, you must create an ISDN user part stack. The ISDN user part (ISUP) is the highest layer in the SS7 signaling stack and is responsible for the handling of calls.

To create an ISUP stack:


1- Click ISUP in the navigation panel

Isup 0.png

2- Click Create New Stack

Toolpack v2.5 Create ISUP Stack.png

3- Configure the new ISUP stack:

  • Make sure the box labeled Enabled is checked
  • Enter a name for the stack
  • Select a primary hardware adapter
  • Select a secondary hardware adapter
  • Click Create

Toolpack v2.5 Creating ISUP Stack.png

4- Verify that the "IsupStack was successfully created" message appears

Toolpack v2.5 ISUP Stack Created.png


List of Parameters