Actions

Creating a SIP Stack


This article applies to: Product Version
SBC 3.0, 3.1

Session Initiation Protocol, more commonly known as SIP, is a signaling protocol for packet-based networks and is commonly used, along with H.323 to provide signaling for Voice over IP (VoIP) communications. You must configure SIP signaling for your system. The first step in doing so is to create a SIP stack:


1- Click SIP in the navigation panel

SIP NavigationMenu.png


2- Click Create New Sip

Create New SIP.png


3- Create the new SIP stack:

  • Verify that the box labeled Enabled is checked
  • Enter a name for the stack
  • Click Create

Create New SIP1.png


4- Verify that the "SipCfg was successfully created" message appears

Create New SIP2.png

List of Parameters