Actions

Toolpack:Creating a SIP Domain SBC A: Difference between revisions

(add missing parameters)
No edit summary
Line 18: Line 18:
3- Create the new Domain:
3- Create the new Domain:


* Enter a '''Name''' of this configuration
* Enter a configuration '''Name''' for this domain.
* Enter a '''Domain Name''' for the SIP Registration Domain (domain can be a FQDN or an IP address)
* Enter a '''Domain Name''' for the SIP Registration Domain (domain can be a FQDN or an IP address)
* Set the number 'Maximum Registered Users' for this domain
* Set the number 'Maximum Registered Users' for this domain

Revision as of 15:57, 26 July 2017

Applies to version(s): v3.0

A SIP domain represents a grouping of devices (or users) that can communicate with one another. You must configure SIP Registration Domain for your system. The first step in doing so is to create a SIP Domain:


1- Click SIP Domain in the navigation panel

SIP Domain NavigationMenu.png


2- Click Create New Domain

Create SIP Domain.png


3- Create the new Domain:

  • Enter a configuration Name for this domain.
  • Enter a Domain Name for the SIP Registration Domain (domain can be a FQDN or an IP address)
  • Set the number 'Maximum Registered Users' for this domain
  • Set the Expires value used by SBC when the remote device doesn't supply one (Default Contact Expire)
  • Select Routing Method the system will use to route sessions.
    • Register source: Sends SIP Invite to the registering source IP address.
    • Contact: Sends SIP Invite to the 'contact' from the Register message.
  • Forwarding Mode
    • Contact Remapping: Changes the user and the IP address.
    • Contact Passthrough: Doesn't change anything. Enables devices to be contacted directly without going through the SBC.
  • Click Create

Create SIP Domain1.png


4- Verify that the Sip registration domain was successfully created message appears

Create SIP Domain2.png

Create SIP Domain3.png