Actions

Toolpack:Creating MTP3 Links (M3UA) A: Difference between revisions

No edit summary
No edit summary
Line 27: Line 27:


[[Image:Toolpack_v2.5_MTP3_Link_Created.png]]
[[Image:Toolpack_v2.5_MTP3_Link_Created.png]]
==List of Parameters==
* [[Parameter: Name|Name]]
* [[Parameter: Type of Link to Bind|Type of Link to Bind]]
* [[Parameter: MTP2 Link|MTP2 Link]]
* [[Parameter: Priority Level|Priority Level]]
* [[Parameter: Message Priority|Message Priority]]
* [[Parameter: C Link|C Link]]
* [[Parameter: Link Test Slc|Link Test Slc]]
* [[Parameter: Link Test Characters|Link Test Characters]]

Revision as of 14:10, 9 August 2010

Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with a MTP2 link; they are connected in a one-to-one fashion.

To create an MTP3 link:


1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

Toolpack v2.5 Create MTP3 Link.png

2- Configure the new MTP3 link:

  • Enter a name for the link
  • Select MTP2 as the type of link to bind
  • Select an MTP2 link
  • Select a priority level
  • Select a Messages priority
  • Set the C Link value
  • Enter a Link Test Slc (this value is unique in the link list)
  • Enter Link Test Characters
  • Click Create

Toolpack v2.5 Creating MTP3 Link M3UA.png


3- Verify that the "Mtp3Link was successfully created" message appears

Toolpack v2.5 MTP3 Link Created.png


List of Parameters