Actions

Toolpack:Creating MTP3 Links (M3UA) A: Difference between revisions

No edit summary
No edit summary
 
(4 intermediate revisions by the same user not shown)
Line 1: Line 1:
=== '''''Applies to version(s): v2.5, v2.6, v2.7''''' ===
{{DISPLAYTITLE:Creating MTP3 Links (M3UA)}}
Now that you have created an MTP3 linkset, you must create MTP3 links for your system.
Now that you have created an MTP3 linkset, you must create MTP3 links for your system.
An MTP3 link is used to connect with a MTP2 link; they are connected in a one-to-one fashion.
An MTP3 link is used to connect with a MTP2 link; they are connected in a one-to-one fashion.
Line 27: Line 29:


[[Image:Toolpack_v2.5_MTP3_Link_Created.png]]
[[Image:Toolpack_v2.5_MTP3_Link_Created.png]]
==List of Parameters==
* [[Parameter: Name|Name]]
* [[Parameter: Type of Link to Bind|Type of Link to Bind]]
* [[Parameter: MTP2 Link|MTP2 Link]]
* [[Parameter: Priority Level|Priority Level]]
* [[Parameter: Message Priority|Message Priority]]
* [[Parameter: C Link|C Link]]
* [[Parameter: Link Test Slc|Link Test Slc]]
* [[Parameter: Link Test Characters|Link Test Characters]]

Latest revision as of 12:00, 15 July 2013

Applies to version(s): v2.5, v2.6, v2.7

Now that you have created an MTP3 linkset, you must create MTP3 links for your system. An MTP3 link is used to connect with a MTP2 link; they are connected in a one-to-one fashion.

To create an MTP3 link:


1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

Toolpack v2.5 Create MTP3 Link.png

2- Configure the new MTP3 link:

  • Enter a name for the link
  • Select MTP2 as the type of link to bind
  • Select an MTP2 link
  • Select a priority level
  • Select a Messages priority
  • Set the C Link value
  • Enter a Link Test Slc (this value is unique in the link list)
  • Enter Link Test Characters
  • Click Create

Toolpack v2.5 Creating MTP3 Link M3UA.png


3- Verify that the "Mtp3Link was successfully created" message appears

Toolpack v2.5 MTP3 Link Created.png


List of Parameters