Actions

Creating MTP3 Links (M2PA)

Revision as of 14:44, 9 July 2012 by Allyntree (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version(s): v2.5, v2.6.

Now that you have created an MTP3 linkset, you must create MTP3 links for it. This can be done from the MTP3 linkset configuration window. A linkset is used to logically combine multiple MTP3 links going to the same DPC into a single entity. One linkset could be comprised of the links between a point code identifying the Tmedia/Tdev SS7 node and a point code identifying the adjacent SS7 equipment.

To create an MTP3 link:


1- Click Create New Mtp3 Link in the MTP3 linkset configuration window

Toolpack v2.5 Create M2PA Link.png

2- Configure the new MTP3 link:

  • Enter a name for the link
  • Under Type of link to bind, select M2PA.
  • Select an MTP2 link
  • Select a priority level (from 0 to 3)
  • Select a message priority (from "none" to 3)
  • Set the C Link value
  • Enter a Link Test Slc (this value is unique in the link list)
  • Enter Link Test Characters
  • Click Create

Toolpack v2.5 Creating MTP3 Link M2PA.png

3- Verify that the "Mtp3Link was successfully created" message appears

Toolpack v2.5 MTP3 Link Created.png


List of Parameters