Actions

Creating M2UA Links

Revision as of 11:59, 15 July 2013 by Allyntree (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Applies to version(s): v2.5, v2.6, v2.7

Now that you have created an M2UA cluster, you must create M2UA links for your system.

An M2UA link is always bound to an MTP2 link, and can be seen a way of extending MTP2 functionality.

To create an M2UA link:


1- Click Create New M2ua Link in the M2UA cluster configuration window:

Toolpack v2.5 Create M2UA Link.png

2- Configure the new M2UA link:

  • Enter a name for the link
  • IMPORTANT!
    • For a system on a signaling gateway: Select an MTP2 link
    • For a system on a media gateway controller: Select NONE
  • Select a protocol type (same as MTP2)
  • Select an interface ID type
  • Enter an appropriate interface ID (must be unique to each link)
  • Click Create

Toolpack v2.5 Creating M2UA Link.png

3- Verify that the "M2ua Link was successfully created" message appears

Toolpack v2.5 M2UA Link Created.png


List of Parameters