Actions

Toolpack:Configuraing NFAS D: Difference between revisions

No edit summary
No edit summary
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
=== '''''Applies to version(s): v2.10.''''' ===
{{DISPLAYTITLE:Configure NFAS}}
{{DISPLAYTITLE:Configure NFAS}}
{| class="wikitable"
|-
|rowspan="2"|This article applies to:
|'''Product'''
|'''Version'''
|-
|Tmedia
|2.10, 3.0, 3.2
|}
ISDN-PRI signaling can be configured for your system. To do so, you must create a new ISDN stack.
ISDN-PRI signaling can be configured for your system. To do so, you must create a new ISDN stack.


Integrated Systems Digital Network (ISDN) is a circuit-switched telephone system that integrated voice and data on the same lines.Tmedia and Tdev systems can be configured to provide an ISDN signaling stack on the trunks of one or more units to meet system configuration requirements.
Integrated Systems Digital Network (ISDN) is a circuit-switched telephone system that integrates voice and data on the same lines. Tmedia and Tdev systems can be configured to provide an ISDN signaling stack on the trunks of one or more units to meet your system configuration requirements.


To create a new ISDN stack:
To create a new ISDN stack:
Line 11: Line 20:


[[Image:ISDN_NFAS_0.png]]
[[Image:ISDN_NFAS_0.png]]


2- Click '''Create New ISDN Stack'''
2- Click '''Create New ISDN Stack'''


[[Image:ISDN_NFAS_1.png]]
[[Image:ISDN_NFAS_1.png]]


3- Create the new stack:
3- Create the new stack:
Line 26: Line 33:
* Select a '''variant''' to associate with the stack
* Select a '''variant''' to associate with the stack
* Determine whether the stack will operate on the '''user side''', or the '''network side'''
* Determine whether the stack will operate on the '''user side''', or the '''network side'''
* Select a '''primary D-channel line service'''
* Select a '''line service'''
* Click '''Create'''
* Click '''Create'''


[[Image:Create_ISDN_NFAS_2_a.png]]
[[Image:Create_ISDN_Stack_2_a.png‎ ]]




Line 121: Line 128:
</pre>
</pre>
</div>
</div>


==List of Parameters==
==List of Parameters==

Latest revision as of 14:09, 25 November 2020

This article applies to: Product Version
Tmedia 2.10, 3.0, 3.2

ISDN-PRI signaling can be configured for your system. To do so, you must create a new ISDN stack.

Integrated Systems Digital Network (ISDN) is a circuit-switched telephone system that integrates voice and data on the same lines. Tmedia and Tdev systems can be configured to provide an ISDN signaling stack on the trunks of one or more units to meet your system configuration requirements.

To create a new ISDN stack:


1- Click ISDN in the navigation menu, under the Signaling header

ISDN NFAS 0.png

2- Click Create New ISDN Stack

ISDN NFAS 1.png

3- Create the new stack:

Note: TelcoBridges offers several ISDN variants, four of which support NFAS. By clicking on 'Create' you confirm the line service and in the case of ISDN variants which support NFAS you are permitted to add additional line services.

  • Verify that the box labeled Enabled is checked
  • Enter a name for the new ISDN stack
  • Select a variant to associate with the stack
  • Determine whether the stack will operate on the user side, or the network side
  • Select a line service
  • Click Create

Create ISDN Stack 2 a.png


4- Verify that the "ISDN stack was successfully created" message appears

ISDN NFAS 3.png


5- Create a backup line:

  • Click on the Available line on the righthand side of the screen, and select the arrow to add it to the Current-Line Services. Up to 20 line services can be added in one NFAS group.
  • Select the line service that will be used as a D-channel backup by this ISDN stack instance.
  • Click Save

ISDN NFAS 4.png


6- Verify that the "ISDN stack was successfully updated" message appears, and that the new trunk line is listed in the ISDN Stack List

ISDN NFAS 5.png


Path 

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/isdn_stacks/@[isdn_stack]

Parameters (text) 

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/isdn_stacks/@[isdn_stack]
dchannel_bkp_line_service = ""
enabled                   = true
line_services             = [ "@[line_service_name]" ]
name                      = "FNT01"
side                      = "User"
variant                   = "NET5"

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/isdn_stacks/@[isdn_stack]/advanced_parameters
force_wake_up = false
options       = 0

/configurations/@[configuration_name]/hardware_units/@[hardware_name]/isdn_stacks/@[isdn_stack]/timers
t301_timer         = "3 minutes"
t302_timer         = "15 seconds"
t303_timer         = "4 seconds"
t304_timer         = "20 seconds"
t305_timer         = "30 seconds"
t307_timer         = "3 minutes"
t308_timer         = "4 seconds"
t309_net5_timer    = "6 seconds"
t309_timer         = "90 seconds"
t310_network_timer = "10 seconds"
t310_user_timer    = "30 seconds"
t313_timer         = "4 seconds"
t316_timer         = "4 seconds"

Parameters (json) 

{
  "advanced_parameters" : {
    "force_wake_up" : false,
    "options" : 0
  },
  "dchannel_bkp_line_service" : "",
  "enabled" : true,
  "line_services" : [
    "@[line_service_name]"
  ],
  "name" : "@[isdn_stack]",
  "side" : "User",
  "timers" : {
    "t301_timer" : "3 minutes",
    "t302_timer" : "15 seconds",
    "t303_timer" : "4 seconds",
    "t304_timer" : "20 seconds",
    "t305_timer" : "30 seconds",
    "t307_timer" : "3 minutes",
    "t308_timer" : "4 seconds",
    "t309_net5_timer" : "6 seconds",
    "t309_timer" : "90 seconds",
    "t310_network_timer" : "10 seconds",
    "t310_user_timer" : "30 seconds",
    "t313_timer" : "4 seconds",
    "t316_timer" : "4 seconds"
  },
  "variant" : "NET5"
}

List of Parameters



Advanced Parameters

Retrieved from "https://docs.telcobridges.com/index.php?title=Toolpack:Configuraing_NFAS_D&oldid=29198"