Allocating a SIP Network Access Point (NAP)

Applies to version(s): v3.0

You must allocate a SIP NAP for your system. To create a new NAP:

1- Click NAPs in the navigation panel

2- Click Create New NAP

3- Create the new NAP:

• Enter a name for the NAP
• Click Create

4- Verify that the NAP was successfully created message appears

5- Associate a SIP transport server with the new NAP:

• Select a SIP Transport Server from the Available list
• Click "<<" to associate the SIP Transport Server with the NAP

6- Enter proxy address:

7- Associate a Port range with the new NAP:

• Select a port range from the Available list
• Click "<<" to associate the Port range with the NAP

8- [OPTIONAL] Associate a SIP Domain with the new NAP:

• Select a sip domain from the Available list
• Click "<<" to associate the SIP Domain with the NAP

9- Configure settings for the following parameter groups as required:

• Registration Parameters
• Authentication Parameters
• Network Address Translation
• SIP-I Parameters
• Advanced Parameters

• Click Save

10- Since 3.0.103 you have the option to disable a NAP. This will stop sending or receiving calls on this NAP.