Adding TMS Hardware

Revision as of 18:59, 25 October 2012 by Allyntree (talk | contribs) (→‎Applies to version v2.6)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version v2.6

When you receive a new system, at least one hardware configuration will have been set in the Toolpack application server, by default. To add a TMS hardware device to your system, you must use the Tmedia Web Portal.

Schematic showing 2 TMP6400 devices with an external server and a second machine with a web browser

To add one or more additional hardware devices to the Toolpack system configuration, their serial numbers must be registered with the Toolpack application server.

To add a hardware device:

1- Click Hardware in the navigation panel

CreateHardwareTms 0 A.png

2- Click Create New Hardware, to add a new hardware device

CreateHardwareTms 1 A.png

3- Enter a name for the hardware device

  • Enter the serial number of the new hardware device (filling in the Serial Number field will cause auto-completion of the field to occur).
  • Select the appropriate hardware device from the Type field. (In this case select TMS)
  • Enter the location in which the hardware device is installed.
  • Enter a meaningful description as to the usage or purpose of the hardware device.
  • Select Enabled from the Target State field.
  • Click Create

CreateHardwareTms 2 1 A.png

4- Verify that the newly added hardware device appears in the TMS Hardware List below

CreateHardwareTms 3 A.png