View source for Toolpack:Adding M2PA Links A

=== '''''Applies to version(s): v2.5, v2.6., v2.7''''' ===
{{DISPLAYTITLE:Adding M2PA Links}}
Now that you have created an M2PA service access point (SAP), you must create a new M2PA link. This can be done from the M2PA SAP configuration window.
To create an M2PA link:


1- Click '''Create new M2pa link''' in the M2PA SAP configuration window:

[[Image:Toolpack_v2.5_Create_M2PA_Link.png]]


2- Configure the new link:

* Enter a '''name''' for the link
* Select a '''protocol type''':
** [[ITU]]
** [[ANSI]]
** [[TTC]]
* Set other features, as needed:
** Number of '''SCTP Streams''' 
** '''IP Header [[TOS]]'''
** '''Destination port''' (same value as the one configured on the destination side)
* Click '''Create'''


[[Image:Toolpack_v2.5_Creating_M2PA_Link.png]]


3- Enter a '''destination address''' in the appropriate box in the information panel:

* Click the '''"<<"''' button to add the destination address to the address list

[[Image:Toolpack_v2.5_M2PA_Link_Address.png]]


4- Verify that the address has been added to the list, and that the '''"<i>(your address)</i> was successfully added"''' message appears (ex.: here the address is 190.0.0.0)

[[Image:Toolpack_v2.5_M2PA_Link_Address_2.png]]


==List of Parameters==

* [[Parameter: Name|Name]]
* [[Parameter: Protocol Type|Protocol Type]]
* [[Parameter: Number of SCTP Streams|Number of SCTP Streams]]
* [[Parameter: IP Header TOS|IP Header TOS]]
* [[Parameter: Destination Port|Destination Port]]