Activating a Software Release

Revision as of 18:52, 13 November 2020 by Allyntree (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
This article applies to: Product Version
Tmedia 2.8, 2.9, 2.10, 3.0, 3.2
SBC 3.0, 3.1

Note: This procedure does not affect the operation of your system.

Once the new release version is installed, it is necessary to activate the new software version in the system.

Warning: This procedure requires a restart of the platforms and will affect service until the activation of the new software release is complete.

1- Click System in the navigation panel.

ActivateSoftware A.png

2- Click Activate to begin the activation of the new release.

Host Control Activate Package Activate A.png

  • It will take a few minutes for the system to upgrade. 

Host Control Activate Package Activate 1 A.png


  • You can verify the status of the upgrade by using the tool: tbx_cli_tools_remote and selecting the tboamapp application.
  • You can fall back to another release by carrying out the "Activate Release" action again from the web portal. If you do not have access to the Web Portal, follow How To Fall back to an older Software Release.

Accelerating the activation of a software release

Activating a new release may take up to 10 minutes per unit.

To enable a simultaneous upgrade of all units:

1- Select Applications from the navigation panel.

ActivateAll 0 B.png

2- Select tboamapp.

ActivateAll 1 C.png

3- Click Application Params

ActivateAll 2 A.png

4- Select Allow upgrade of all units simultaneously.

ActivateAll 3 A.png

5- Click Save.