Activating a Software Release

From TBwiki
Revision as of 14:03, 23 September 2014 by Cbilodeau (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Applies to versions: v2.6, v2.7

Note: This procedure affects service.

Important: To upgrade your system to v2.8 or later directly from the web portal, you need to run at least version v2.7.145.

Once the new release version is installed, it is necessary to activate the new software version in the system.

Warning: This procedure requires a restart of the Tmedia platforms and will affect service until the activation of the new software release is complete.


1- Click System in the navigation menu.

Activate 0.png


2- Select the new release version from 'Activate package box.

Host Control Activate Package v2.5.png


3- Click Activate to begin the activation of the new release.

Host Control Activate Package Activate v2.5.png


  • It will take a few minutes for the system to upgrade. 
  • You can verify the status of the upgrade by using the tool: tbx_cli_tools_remote and selecting the tboamapp application.
  • You can fallback to another release by carrying out the "Activate Release" action again from the web portal. If you do not have access to the Web Portal, follow How To Fallback to an older Software Release.


Accelerating the activation of a software release

Activating a new release may take up to 10 minutes per TMedia unit.

To enable a simultaneous upgrade of all Tmedia units:

1- Select Applications from the navigation panel.

ActivateAll 0.png


2- Select tboamapp and click Edit.

ActivateAll 1.png


3- Select Allow upgrade of all adapters simultaneously.

ActivateAll 2.png


4- Click Save.

Personal tools