ProSBC:VitalPBX

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking between ITSP’s SIP Trunk or remote client access for VitalPBX server.

NOTE: SIP Trunk use G.711 in this test. There is no transcoding available.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• VitalPBX.For additional information on VitalPBX, visit VitalPBX offical web site.

Example Environments for SIP Trunking with VitalPBX

Example Configuration

Step by step example SIP Trunk configuration.

• VitalPBX Trunk Creation
• SIP Trunking Example Configuration

Example Environments for Remote Workers with VitalPBX

Example Configuration

Step by step example Remote workers configuration.

• VitalPBX Extension Creation
• Remote Workers Configuration Instruction with VitalPBX

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC