ProSBC:Sippy Configuration with ProSBC

Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking with Sippy Soft Switch.

Prerequisites

• ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
• Sippy Soft Switch. For additional information on Sippysoft, visit Sippysoft official web site.

Example Environments for SIPTrunking with Sippysoft

Example Configuration

Step by step example SIP Trunk configuration.

• Adding ProSBC as a SIP Trunk in Sippy Server
• SIP Trunk Configuration Instruction with Sippy Server

Troubleshooting

Call Trace	Test Call	TBReport	Advanced Troubleshooting of ProSBC
Configure call trace Retrieve call trace	Creating a Test Call	Capture a report of the system	Advanced Troubleshooting of ProSBC