MTP2:Connection mode

The 'Connection mode' parameter specifies the different modes of connection for a MTP2 link.

The following values are allowed:

Connection mode	Description
Normal	MPT2 layer is used in conjunction with an above MTP3 layer
HSL	MPT2 layer high speed link is used in conjunction with an above MTP3 layer

NOTE: The HSL mode uses timeslots 1 to 31 for E1 and 1 to 24 for T1/J1 interfaces. In Normal mode, you pick and choose the timeslots that are required.

MTP2:Connection mode

Revision as of 15:47, 14 August 2009 by Ktrueman (talk | contribs) (initial content)(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Revision as of 15:47, 14 August 2009 by Ktrueman (talk | contribs) (initial content)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)