Actions

SIP Trunk Configuration Instruction with FusionPBX

Revision as of 11:12, 13 May 2022 by Allyntree (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)


This article applies to: Product Version
SBC 3.1

Introduction

This article provides you with a step-by-step SIP Trunk Configuration of ProSBC with FusionPBX systems, using the Web Portal configuration tool. Complete the general installation configuration steps, before you begin configuring your specific scenario. In this article the FQDN (fusionpbx.telcobridges.com) is configured in the FusionPBX server. If you do not use an FQDN, you can use the FusionPBX IP addresso. Learn how to configure the SIP Trunk in FusionPBX for ProSBC from FusionPBX Trunk Creation

FusionPBX SIP Trunk Example

Fusionpbx Trunking 1.png


Configuration Steps

(Step 1)
Create IP Network
(Step 2)
Create Protocol Stack
(Step 3)
Create Call Route


NAP Configuration

  • See Create SIP NAP
    • At this point, you must create two NAPs: One SIP NAP will be a FusionPBX NAP and the other NAP will be for a SIP trunk provided by ITSP.