FreeSBC:SIP Trunking FusionPBX:Example A: Difference between revisions
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
{{DISPLAYTITLE:SIP Trunk Configuration Instruction with FusionPBX}} | {{DISPLAYTITLE:SIP Trunk Configuration Instruction with FusionPBX}} | ||
== | {| class="wikitable" | ||
|- | |||
|rowspan="3"|This article applies to: | |||
|'''Product''' | |||
|'''Version''' | |||
|- | |||
|SBC | |||
|3.1 | |||
|} | |||
=Introduction= | =Introduction= |
Latest revision as of 11:12, 13 May 2022
This article applies to: | Product | Version |
SBC | 3.1 |
Introduction
This article provides you with a step-by-step SIP Trunk Configuration of ProSBC with FusionPBX systems, using the Web Portal configuration tool. Complete the general installation configuration steps, before you begin configuring your specific scenario. In this article the FQDN (fusionpbx.telcobridges.com) is configured in the FusionPBX server. If you do not use an FQDN, you can use the FusionPBX IP addresso. Learn how to configure the SIP Trunk in FusionPBX for ProSBC from FusionPBX Trunk Creation
FusionPBX SIP Trunk Example
Configuration Steps
(Step 1) Create IP Network |
(Step 2) Create Protocol Stack |
(Step 3) Create Call Route |
---|---|---|
|
NAP Configuration
- See Create SIP NAP
- At this point, you must create two NAPs: One SIP NAP will be a FusionPBX NAP and the other NAP will be for a SIP trunk provided by ITSP.