FreeSBC:SIP Trunking FusionPBX:Example A: Difference between revisions
No edit summary |
m (→Introduction) |
||
Line 4: | Line 4: | ||
=Introduction= | =Introduction= | ||
This article provides you with a step-by-step SIP Trunk Configuration of [[FreeSBC|ProSBC]] with FusionPBX systems, using the Web Portal configuration tool. Complete the general installation configuration steps, before you begin configuring your specific scenario. In this article the FQDN ('''fusionpbx.telcobridges.com''') is configured in the FusionPBX server. If you do not use an FQDN, you can use the FusionPBX IP addresso. Learn how to configure the SIP Trunk in FusionPBX for ProSBC from [[FreeSBC:FusionPBX Trunk Configuration:FusionPBX_Trunk_Configuration|FusionPBX Trunk Creation]] | |||
=FusionPBX SIP Trunk Example= | =FusionPBX SIP Trunk Example= |
Revision as of 11:08, 13 May 2022
Applies to version: v3.1
Introduction
This article provides you with a step-by-step SIP Trunk Configuration of ProSBC with FusionPBX systems, using the Web Portal configuration tool. Complete the general installation configuration steps, before you begin configuring your specific scenario. In this article the FQDN (fusionpbx.telcobridges.com) is configured in the FusionPBX server. If you do not use an FQDN, you can use the FusionPBX IP addresso. Learn how to configure the SIP Trunk in FusionPBX for ProSBC from FusionPBX Trunk Creation
FusionPBX SIP Trunk Example
Configuration Steps
(Step 1) Create IP Network |
(Step 2) Create Protocol Stack |
(Step 3) Create Call Route |
---|---|---|
|
NAP Configuration
- See Create SIP NAP
- Here, You must create two NAPs, one SIP NAP will be FusionPBX NAP and other NAP will be for SIP trunk provided by ITSP