Actions

FreeSBC:SIP Trunking:Example A: Difference between revisions

No edit summary
No edit summary
Line 137: Line 137:
*Click '''Save'''
*Click '''Save'''


[[Image:Create_IPif_LAN_1.png]]<br><br>
[[Image:Create_IP_if_LAN_1.png]]<br><br>
<br><br>
<br><br>

Revision as of 09:31, 22 January 2018

Introduction

The SIP Trunking Example Configuration provides you with a step by step SIP trunking Configuration of FreeSbc systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario.

Prerequisites

FreeSbc devices must be installed as described in their respective installation guides.

IP Network Configuration

Virtual Port Configuration for Wide Area Network

1. Select IP Interfaces from the navigation panel

Create Voip Interface Tsbc 0.png



2. Click the Virtual Ports tab.

  • Click Create New Virtual Port

SIP Trunking VP Create.png

3. Configure the virtual port.

  • Enter a name for the virtual port
  • Select the host(s) to which the virtual port is assigned
  • Select a physical port to which the virtual port is assigned
  • Click Create

SIP Trunking VP WAN.png

4. Create a VLAN that uses this virtual port

  • Click Create new Host VLAN

SIP Trunking Vlan WAN.png

5. Configure the new VLAN

  • Enter a name for the VLAN
  • If the port is to be used untagged, make sure Untagged is checked.
  • If the port is to be used with a 802.1Q tag, uncheck Untagged and enter a VLAN ID.
  • Click Create

SIP Trunking Vlan WAN Interface 1.png

OR

SIP Trunking Vlan WAN Interface 2.png

Virtual Port Configuration for Local Area Network

1. Select IP Interfaces from the navigation panel

Create Voip Interface Tsbc 0.png



2. 2. Click the Virtual Ports tab.

  • Click Create New Virtual Port

SIP Trunking VP Create LAN.png

3. Configure the virtual port.

  • Enter a name for the virtual port
  • Select the host(s) to which the virtual port is assigned
  • Select a physical port to which the virtual port is assigned
  • Click Create

SIP Trunking VP LAN.png

4. Create a VLAN that uses this virtual port

  • Click Create new Host VLAN

SIP Trunking Vlan LAN.png

5. Configure the new VLAN

  • Enter a name for the VLAN
  • If the port is to be used untagged, make sure Untagged is checked.
  • If the port is to be used with a 802.1Q tag, uncheck Untagged and enter a VLAN ID.
  • Click Create

SIP Trunking Vlan LAN Interface 1.png

OR

SIP Trunking Vlan LAN Interface 2.png

Configuring IP Interface for Wide Area Network

1. Select IP Interfaces from the navigation panel:

Create IP Interface Tsbc 0.png




2. Click the IP Interfaces tab.

  • Click Create New IP Interface

Create IPif WAN.png




3. Configure the IP interface:

  • Enter a name for the interface
  • Select 1 or more services to use for the IP interface (RTP and SIP).
  • Select the Host VLAN from which IP packets will exit.
  • Indicate whether or not to use DHCP to automatically get an IP address for this port. (selecting this option removes the need to enter and IP address, Netmask, and Gateway)
  • Enter an IP address
  • Enter a Netmask
  • Enter a gateway address
  • Click Save


Create IPif WAN 1.png



Configuring IP Interface for Local Area Network

1. Select IP Interfaces from the navigation panel:

Create IP Interface Tsbc 0.png




2. Click the IP Interfaces tab.

  • Click Create New IP Interface

Create IPif LAN.png




3. Configure the IP interface:

  • Enter a name for the interface
  • Select 1 or more services to use for the IP interface (RTP and SIP).
  • Select the Host VLAN from which IP packets will exit.
  • Indicate whether or not to use DHCP to automatically get an IP address for this port. (selecting this option removes the need to enter and IP address, Netmask, and Gateway)
  • Enter an IP address
  • Enter a Netmask
  • Enter a gateway address
  • Click Save

Create IP if LAN 1.png