Actions

ProSBC:SIP Trunking:Configuration

Revision as of 06:48, 9 May 2022 by Serdar Civici (talk | contribs) (→‎Typical SIP Trunking Sample)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Applies to version: v3.0, v3.1

Introduction

The SIP Trunking Configuration Tutorial provides you with a scenario-based approach to configure a ProSBC system and monitor its status, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific application.

Prerequisites

ProSBC devices must be installed as described in their respective installation guides.

Typical SIP Trunking Sample

FreeSBC Sip Trunking new.png

SIP TRUNKING CONFIGURATION

Prerequisites for configuration

[Todo]

Steps for configuration

(Step 1)
Create IP Network
(Step 2)
Create Protocol Stack
(Step 3)
Create Call Route

Example Configuration

Step by step example SIP Trunk configuration.

Troubleshooting

Call Trace Test Call TBReport Advanced Troubleshooting of ProSBC