Actions

Remote Workers Configuration Instruction with 3CX

Revision as of 11:00, 16 May 2022 by Allyntree (talk | contribs)


This article applies to: Product Version
SBC 2.10 3.0, 3.1

Introduction

This Remote Workers configuration instruction with a 3CX Example Configuration provides you with a step-by-step Remote workers Configuration of ProSBC with 3CX systems, using the Web Portal configuration tool. Complete general installation configuration steps, before you begin configuring your specific scenario. In this guide, FQDN (telcobridges.3cx.ca) is configured in the 3CX server, and registration forwarding is used in ProSBC. Please check how to configure the phone provisioning in 3CX for ProSBC from 3CX Phone Provisioning Settings

3CX Remote Workers Example

3CX Remote Workers 1.png

Configuration Steps

(Step 1)
Create IP Network
(Step 2)
Create Protocol Stack
(Step 3)
Create Call Route

NAP Configuration

SIP Domain Configuration

  • See Create a SIP domain
    • Here domain name will be FQDN of the 3CX server. In our example, it will be telcobridges.3cx.ca

Route Configuration

  • In most cases, ProSBC will be required to route SIP calls (SIP Invite) to registered users. This is done by creating appropriate routes
  • 3CX wants to see its FQDN in all messages. Please enable forward_sip_domain in the route settings.