Create Internal NAT B: Difference between revisions
(Added Northbound Interafce content) |
No edit summary |
||
| Line 52: | Line 52: | ||
</pre> | </pre> | ||
</div> | </div> | ||
==List of Parameters== | ==List of Parameters== | ||
Revision as of 11:23, 16 December 2015
Applies to version(s): v2.9.
One or more internal NATs can be configured to manage internal IP connections.
To configure an Internal NAT
1. Select NATs from the navigation panel.
2. Click Create New Internal NAT.
3. Configure the following fields:
- Enter a name for the internal NAT.
- Select the Gateway IP Address of your internal NAT from Local Gateway IP Interface.
- Select the public IP from Public Interface.
- Click Create
4. Verfiy that the Configuration was successfully created message is displayed
Path
/configurations/@[configuration_name]/internal_nats/@[internalNat_name]
Parameters (text)
/configurations/@[configuration_name]/internal_nats/@[internalNat_name] local_ip_interface = "@[hardware_name].@[vlan]" name = "@[internalNat_name]" public_ip_interface = "@[hardware_name].@[vlan]"
Parameters (json)
{
"local_ip_interface" : "@[hardware_name].@[vlan]",
"name" : "@[internalNat_name]",
"public_ip_interface" : "@[hardware_name].@[vlan]"
}