Control Network: Difference between revisions

Revision as of 10:29, 12 September 2022

The control network is the Ethernet network used by Toolpack to control Toolpack applications and the Tmedia products.

There are 3 control network:

It is possible to modify the network settings if it overlaps with your private network.

Refer to the following:

There are 2 control network:

@@ Line 1: / Line 1: @@
-The control network is the Ethernet network used by Toolpack to control the Toolpack applications and the Tmedia hardware products.
+{{DISPLAYTITLE:Control Network}}
-<br>
+__NOTOC__
+The control network is the Ethernet network used by Toolpack to control Toolpack applications and the Tmedia products.
-== TMG<br> ==
-On TMG product, there is 1 control network interface. The Control Network interface is on 172.31.1.2 interface. For TMG800 and TMG3200, it is eth1 interface. For TMG5800, it is the eth2 interfac<br>
+== TMG800/TMG3200 ==
-===  ===
+There are 3 control network:
+* 172.31.1.0/30 network
+* 172.16.0.0/15 network vlan 710
+* 172.18.0.0/15 network vlan 711
+=== Modifying Control Network ===
+It is possible to modify the network settings if it overlaps with your private network.
-== TMP<br> ==
+Refer to the following:
+* [[Toolpack:Host_1Plus1_Primary_A|Version 2.9]]
+* [[Toolpack:Host_1Plus1_Primary_A|Version 2.8]]
+* [[Toolpack:Modifying_TMG_Control_Network_A|Version 2.7]]
-== TMP800<br> ==
+== TMP7800  ==
-On TMP800 product, there is 1 control network interface. It is the eth-1 on the back of the device.<br>
+There are 2 control network:
+* 172.16.0.0/15 network vlan 710
+* 172.18.0.0/15 network vlan 711
-<br>
-=== TMP6400/TMS1600<br> ===
+[[Category:Revise on Major]]
-On the TMP6400 and TMS1600, there are 2 control network interfaces. They are labeled eth1 and eth2 on the back of the devices.<br>