Configure Fax T38
This article applies to: | Product | Version |
Tmedia | 2.8 |
To enable T.38:
1. Select Profiles from the navigation menu.
2. Click Create New Profile
3. Enter a name for the Fax Profile.
- Click Fax/Modem Relay to expand the view.
4. Configure the settings:
- Set Enable Fax/Modem Relay to enabled.
- Set Detection Mode to Standard.
- Set Relay Mode to T.38.
- Uncheck the Use V.34 option. (For reliability reason, some faxes failed to failback to V17
5. Verify that the Profile was successfully created message is displayed.