Creating an SCCP SSN

(Redirected from Toolpack v2.5:Creating an SCCP SSN)

Applies to version(s): v2.5, v2.6, 2.7

Now that you have configured an SCCP Route, you can add SCCP Sub-System Number (SSN) on the route.

SCCP Sub-System Number are used to identify applications of this route's DPC. SCCP managament will maintain the availability state for each SSN associated to this route's DPC. The SSN management status affects the routing decision. If a peer SSN is unavailable, the SCCP stack will try an alternate DPC/route.

To Create an SCCP SSN:

1- Click Create New SSN from the SCCP route configuration window

Toolpack v2.5 Create SCCP SSN.png

2- Configure the new SCCP SSN:

Toolpack v2.5 Creating SCCP SSN.png

3- Verify that the "SccpRtSsn was successfully created" message appears

Toolpack v2.5 SCCP SSN Created.png

4- Configure SCCP Route SSN Backup Point Code

SCCP Route SSN Backup PC.png

  • Note: For each selected point codes, a valid SCCP route must exist.

5- Next Step: Create an SCCP GTT Association

List of Parameters


Previous Next
Create an SCCP Route Create an SCCP GTT Association