Status Menus:Adapters and IP Interfaces

Applies to version(s): v2.6.

General and detailed status information about the Tmedia units, also referred to as adapters, is accessible from the Hardware tab of the Global Status view.

Adapters (general view)

The general view of the Hardware status screen provides information about the Tmedia units in a system. From this view you can know the status of Tmedia units by seeing if they are up, down, or disabled. In addition, similar information can be known about the IP interfaces of the Tmedia units. Selecting a Tmedia unit link will cause its detailed view to be displayed. The same is true for the IP interface links.

Toolpack v2.6 Adapters Tab.png

Adapters (detailed view)

The Adapters detailed view groups status information about a specific adapter under three tabs, as follows:

  • Hardware
  • Sensors
  • Licensed Features


The Hardware status screen displays detailed information about the Tmedia unit, such as the software version, the firmware version, and the configuration state. From this view, the OAM target state can be modified from enabled to disabled, and the option to reboot the adapter or not can be changed.

  • Select an Adapter to view its detailed status.

Toolpack v2.6 Adapter Hardware.png


The Sensors status screen displays detailed information about the temperature and voltage recorded by various sensors located inside the Tmedia unit chassis.

Toolpack v2.5 Adapter Sensors.png

Licensed Features

The Licensed Feature status screen displays detailed information about licensed features. A zero in the 'Effective feature cnt' column indicates that the Tmedia unit does not have access to the feature.

Toolpack v2.6 Adapter Licensed Features.png

IP Interfaces (detailed view)

The IP Interfaces status screen displays detailed information about a specific IP interface. This view displays the state of the link, its activity, and configuration settings.

Toolpack v2.5 IP Interface Status.png