Actions

Toolpack: Enabling CDR

Applies to version(s): v2.8

To enable CDR:

1- Select Gateway from the navigation panel.

EnableCdr 0.png


2- To enable CDR, select Use CDR behavior.

3- Configure the CDR behavior in the CDR Options section:

  • Enable periodic CDR update will add one entry in the CDR per Periodic CDR update time, in minutes.
  • Select one of the Text CDR mode from the CDR Mode :
    • Text CDR only: Will store the CDRs in a flat file. See Text CDR
    • RADIUS CDR only: Will send the CDR to an external RADIUS Server. See Radius CDR
    • Text and RADIUS CDR: Will store the CDRs in a flat file and send the CDR to an external RADIUS Server.
    • RADIUS CDR with Text CDR Fallback: Will send the CDR to an external RADIUS Server and if the RADIUS server cannot handle the load of CDRs, they will be stored in a flat file.
  • Click Save to save your changes.

EnableCdr 1.png

4- Expand the Text CDR parameters section

  • Configure the Text CDR parameters as required. Refer to the description of parameters described below.

EnableCdr 2.png

List of Parameters