Creating an MTP3 Route

Applies to version(s): v2.5, v2.6., 2.7

MTP3 routes are built to route traffic from previously created point codes using linksets.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).

To create an MTP3 route:

1- Click Create New Mtp3 Route in the MTP3 network configuration window:

Toolpack v2.5 Create MTP3 Route.png

2- Configure the new MTP3 route:

  • Enter a name for the route
  • Select a point code for the route
  • Select a restart procedure
  • Select a point type
  • Check the Route to Adjacent box, if this route is directed to an adjacent network
  • Click Create

Toolpack v2.5 Creating MTP3 Route.png

3- Verify that the "Mtp3Route was successfully created" message appears

Toolpack v2.5 MTP3 Route Created.png

4- Associate the newly created route with a linkset:

  • Select a linkset from the list provided at the bottom of the route configuration window
  • Click the "<<" button to associate the linkset with the newly created route

Toolpack v2.5 MTP3 Route Linkset.png

List of Parameters