Actions

Creating an M3UA Route (SGP)

Applies to version(s): v2.5, v2.6, v2.7

Now that you have configured M3UA user parts, PSPs, and peer servers, you must create M3UA routes for your system.

You require 1 route per point codes in your system. This means 1 route per DPC (SSP and STP) and 1 per source point code (OPC).


To create an M3UA route on an SGP:


1- Click Create New M3ua Route in the M3UA network configuration window

Toolpack v2.5 Create M3UA Route.png

2- Configure the new M3UA route:

For OPC: This route is used for local point code and to reach the ASP.

  • Enter a name for the route
  • Select a route type:Psrv
  • Select an M3UA peer server: Select the previously configured M3US Peer Server with the right RC
  • Select an M3UA user part:NONE
  • Select a point code: Select the OPC from the MTP3 linkset
  • Select a point code mask (Recommended value: Exact match)
  • Select a sub-service field type:ISUP or SCCP
  • Click Create

Toolpack v2.5 Creating M3UA Route(SGP) OPC.png


For DPC: This route is used to reach the DPC used in MTP3 configuration.

  • Enter a name for the route
  • Select a route type:Mtp3
  • Select an M3UA user part: Select the previously configured M3UA User Part
  • Select a point code: Select the DPC from the MTP3 linkset
  • Select a point code mask (Recommended value: Exact match)
  • Select a sub-service field type:ISUP or SCCP
  • Click Create

Toolpack v2.5 Creating M3UA Route(SGP) DPC.png

3- Verify that the "M3ua Route was successfully created" message appears

Toolpack v2.5 M3UA Route Created.png


List of Parameters