Actions

Creating an M3UA Peer Server (ASP)

Applies to version(s): 2.9, 2.10, 3.0, 3.2

After you create an M3UA peer signaling process, you must create a new M3UA peer server. A peer server is a logical entity on the IP network that is served by one or more PSPs.

To create an M3UA Peer Server:


1- Click M3UA in the navigation panel:

CreateM3ua 0.png


2- Select an M3ua Network:

SelectNetwork SGP 0.png


3- Click Create New M3ua Peer Server in the M3UA network configuration window:

Create M3UA Peer Server SGP 0.png


4- Configure the new M3UA Server:

  • Enter a name for the peer server
  • Create a local Peer Server (PSRV) with a Routing Context (RC) value representing the remote side; RC value representing the remote side.
  • Create a remote Peer Server (PSRV) with a Routing Context (RC) value representing the remote side; RC value representing the remote side.
1) For SG/ASP this value is mandatory to  be the same as the ASP local PSRV RC value
2) ASP uses both local and remote peer servers
  • Select the Traffic Mode Type. For remote peer server, this field is used in ASPAC.
  • Click Create

Create M3UA Peer Server SGP 1.png


5- Verify that the "M3ua Peer Server was successfully created" message appears

Create M3UA Peer Server SGP 2.png


6- Associate the newly created peer server with a peer signaling process (PSP):

  • Select a PSP from the list of available PSPs
  • Click the "<<" button to associate the PSP with the peer server

Create M3UA Peer Server SGP 3.png


7- Repeat steps 4, 5, 6 above for remote or local peer server if one peer server is not done so


Path

/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]

Parameters (text)

/configurations/@[configuration_name]/m3ua_stacks/@[m3ua_name]/m3ua_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]
local               = false
m3ua_psps           = [ "@[m3ua_psp]" ]
name                = "@[m3ua_peer_server]"
routing_ctx         = 0
traffic_mode        = "Active-Standby"

/configurations/@[configuration_name]/m3ua_stacks/M3UA/@[m3ua_name]_networks/@[m3ua_network]/m3ua_psrvs/@[m3ua_peer_server]/advanced_parameters
load_sharing_mode                    = "SLS"
minimum_active_psps_for_load_sharing = 1
req_available                        = false

Parameters (json)

{
  "advanced_parameters" : {
    "load_sharing_mode" : "SLS",
    "minimum_active_psps_for_load_sharing" : 1,
    "req_available" : false
  },
  "local" : false,
  "m3ua_psps" : [
    "@[m3ua_psp]"
  ],
  "name" : "@[m3ua_peer_server]",
  "routing_ctx" : 0,
  "traffic_mode" : "Active-Standby"
}


List of Parameters


Advanced Parameters