Actions

Creating MTP3 Links (M3UA)

This article applies to: Product Version
Tmedia 2.9, 2.10, 3.0, 3.2

Once you have created an MTP3 linkset, you must associate it with MTP3 links. This is because the MTP3 links are used to bind with either An MTP2, M2PA, or M2Ua link. They are connected in a one-to-one fashion.

To create an MTP3 link:

1- Click MTP3 in the navigation panel.

Mtp3 0 A.png


2- Select an MTP3 network.

Create MTP3 Linkset 0.png


3- Select an MTP3 linkset

Create MTP3 Link 0.png


4- Click Create New Mtp3 Link in the MTP3 linkset configuration window

Create MTP3 Link 1.png


5- Configure the new MTP3 link:

  • Enter a name for the link
  • Under Type of link to bind, select MTP2
  • Select an MTP2 link
  • Enter a Link Test Slc (this value is unique in the link list)
  • Enter Link Test Characters
  • Click Create

Create MTP3 Link 2.png


6- Verify that the "Mtp3Link was successfully created" message appears and that the link appears in the Mtp3 Link list.

Create MTP3 Link 3.png


Path


Parameters (text)


Parameters (json)



List of Parameters